COURSE PROJECT ON THE TOPIC: "Gas Supply of the Village of Belgorod"
- Added: 05.03.2015
- Size: 1 MB
- Downloads: 1
Description
Project's Content
|
|
002_Kh1.cdw
|
002_Kh1.cdw.bak
|
003.cdw
|
003.cdw.bak
|
004_Kh3 (1).cdw
|
004_Kh3 (1).cdw.bak
|
005_GP (1).cdw
|
005_GP (1).cdw.bak
|
006_Kh4 (1).cdw
|
006_Kh4 (1).cdw.bak
|
007_Kh5 (1).cdw
|
007_Kh5 (1).cdw.bak
|
008_Kh6 (1).cdw
|
008_Kh6 (1).cdw.bak
|
genplan.cdw
|
genplan.cdw.bak
|
Titulnik.docx
|
ГАЗ курсач.docx
|
Additional information
Contents
ContentsIntroduction
1 Calculation of gaseous fuel characteristics
2 Population definition
3 Calculation of gas demand
3.1 Determination of annual heat consumption
3.1.1 Determination of annual heat consumption for gas consumption in apartments
3.1.2 Determination of annual heat consumption during gas consumption at consumer service enterprises
3.1.3 Determination of annual heat consumption during gas consumption at public catering facilities
3.1.4 Determination of annual heat consumption during gas consumption in health care institutions
3.1.5 Determination of annual heat consumption during gas consumption at bakeries and bakeries
3.1.6 Determination of annual heat consumption for heating, ventilation, hot water supply of residential and public buildings
3.1.7 Determination of annual heat consumption when consuming gas for the needs of trade, consumer services, schools and universities
3.1.8 Drawing up the final table of gas consumption by the city
3.2 Determination of annual and hourly gas consumption by different
consumers
3.3 Construction of annual gas consumption schedules
4 Selection and justification of gas supply system
4.1 Determination of the optimal number of GRP
4.2 Typical diagrams of GRP and GRU
4.3 Selection of gas control stations and units equipment
4.3.1 Selection of pressure regulator
4.3.2 Selection of safety valve
4.3.3 Safety relief valve selection
4.3.4 Filter selection
4.3.5 Selection of shutoff valves
4.4 Structural elements of gas pipelines
4.4.1 Pipes
4.4.2 Gas Pipeline Details
5 Hydraulic calculation of gas pipelines
5.1 Hydraulic calculation of high and medium pressure ring networks
5.1.1 Calculation in emergency modes
5.1.2 Calculation of branches
5.1.3 Calculation at normal flow distribution
5.2 Hydraulic calculation of low pressure dead end gas pipelines
Conclusion
Literature
Introduction
Natural gas is the cheapest energy carrier, so its use is widely used in the field of consumer services of residential and public buildings, as well as in industry. In this regard, competent gas supply to consumers is a very important factor.
The implementation of the course project on gas supply of the city district will allow you to get acquainted in detail with the methods of hydraulic calculation of internal and internal gas supply systems, as well as other necessary calculations, which are an important part of the entire course "Gas supply."
The task of this work is to develop a gas supply system for a quarter of a residential microdistrict in the city of Belgorod. It is also necessary to design an in-house gas supply system for a residential building, which provides continuous gas supply to gas devices and select the equipment of the gas control station.
002_Kh1.cdw
003.cdw
004_Kh3 (1).cdw
005_GP (1).cdw
006_Kh4 (1).cdw
007_Kh5 (1).cdw
008_Kh6 (1).cdw
genplan.cdw
Similar materials
- 07.04.2021
- 28.04.2020
- 11.06.2017
- 18.03.2020
- 04.04.2017
- 24.09.2016