COURSE PROJECT in the discipline "Basis of Pipeline Systems Design" Topic "Hydraulic Calculation of Complex Oil Pipelines"
- Added: 04.04.2017
- Size: 494 KB
- Downloads: 3
Description
A hydraulic calculation of a complex oil pipeline was made in the course and a piezometric graph was built in Compass based on the results.
Project's Content
|
Проектирование ТС.cdw
|
Курсовой ТС.docx
|
Additional information
Contents
Introduction
Task
1 Basic formulas and calculation details
2 Hydraulic calculation
3 Verification calculation
Conclusion
List of literature
Introduction
The purpose of the course project is to familiarize with the calculations of complex oil pipelines, determine their main parameters for the design of main and auxiliary energy equipment at oil pumping stations and other facilities related to the transportation of oil and oil products through pipes.
Conclusion
During the course project, a hydraulic calculation of a complex oil pipeline was carried out. Pump NM7000210 with initial transfer flow of 4100 m3/h and initial head of 330m shall be used to ensure oil transfer with specified parameters. Based on the results of calculations, a piezometric graph was built on an A3 sheet. Microsoft Excel and Compass 3D were used during the project.
Проектирование ТС.cdw
Similar materials
- 04.06.2015
- 17.01.2024
