• RU
  • icon Waiting For Moderation: 0
Menu

Thesis on the topic "Design of a site for the manufacture and restoration of gears"

Description

Graduation qualification work on the topic "Design of a site for the manufacture and restoration of gears"

The work carried out:

design of the production site;

equipment selection;

development of the technological process for manufacturing the part;

design and strength calculation of tooling;

economic calculation of the site;

checking the site for compliance with safety requirements.

Project's Content

icon Вынос.m3d
icon Шестерня ведомая.m3d
icon Верх захвата.a3d
icon Кольцо ГОСТ 6418-81.m3d
icon Крышка.m3d
icon Шпилька М10x1-6gx115.88.40Х.05 ГОСТ 22042-76.m3d
icon Болт М6-6gx20.36 ГОСТ 7798-70.m3d
icon Вал_2.m3d
icon Гайка М10x1-6H.04 (S16) ГОСТ 5915-70.m3d
icon Лист 2.cdw
icon Корпус.m3d
icon Робот сборка.a3d
icon Лист 5.cdw
icon Шестерня ведущая.m3d
icon Прокладка.m3d
icon Фланец.m3d
icon ВКР Ефремов А.С. 16-МБ-КТ1.docx
icon Низ захвата.a3d
icon Муфта.m3d
icon Прокладка под фланец.m3d
icon Рейка.m3d
icon Болт М10x1-6gx40 (S16) ГОСТ 7798-70.m3d
icon Шайба C10.04 ГОСТ 10450-78.m3d
icon Болт М14x1,5-6gx45 (S21) ГОСТ 7798-70.m3d
icon Корпус.m3d
icon Шайба 6 ГОСТ 6402-70.m3d
icon Захват.a3d
icon KR6_R1820-KR6_R1820_HP.m3d
icon Прокладка корпуса.m3d
icon Лист 1.cdw
icon Шайба.m3d
icon Корпус_1.m3d
icon 000 СБ - Насос шестеренчатый.a3d
icon Фланец резьбовой.m3d
icon Вал.m3d
icon Арматура.m3d
icon Шильдик.m3d
icon Пружина.m3d
icon Лист 6.cdw
icon Шпонка 6х6х25 ГОСТ 23360-78.m3d
icon Лист 3.cdw
icon Манжета 1.1-22x35-1 ГОСТ 8752-79.a3d
icon Втулка.m3d
icon Шестерня.m3d
icon Лист 4.cdw
icon Заклепка 3,2х8.m3d
icon KL250-3.m3d
icon Низ.m3d
icon Шайба A.6.099 ГОСТ 11371-78.m3d
icon Корпус_3.m3d
icon Втулка.m3d
icon Вынос низ.m3d
icon Пластина.m3d
icon Верх.m3d
icon Шайба.m3d
up Up