KP on building architecture on the theme: block section 5-storey, apartment building

Contents

Contents:

1. Source Data

2. Space Planning Solution

2.1. Plan view of the building

3. Technical and economic indicators

4. Design Solutions

4.1. Structural diagram of the building

4.2. Heat engineering calculation of the outer wall and attic floor

4.3. Features

4.3.1. Bases

4.3.2. Walls

4.3.3. Overlappings

4.3.4 Floors

4.3.5. Roof

4.3.6. Windows and doors

4.3.7. Roof and roof

5. Exterior and interior finishes

6. Engineering equipment

7. List of literature

1. Initial data

1. Typical design - 5-storey 15-apartment block.

2. The terrain is calm, even.

3. Structural scheme - the building is arceless with a longitudinal arrangement of the bearing walls, spatial rigidity is provided.

4. Design characteristic:

a) foundations - strip prefabricated reinforced concrete slabs of 100 grade concrete;

b) walls - brick with insulation by polystyrene foam in the wall cavity;

c) partitions - from easily concrete blocks with a thickness of 100 mm;

d) coatings (and floors) - prefabricated reinforced concrete multi-pillar slabs (floors) according to the 1.1411 series;

e) jumpers - precast reinforced concrete according to the series 1.13810;

e) roof - rolled from metal cuttings.

g) filling of openings: - wooden windows as per GOST 16.28989;

h) wooden doors for residential and public buildings GOST 662988;

and) floors - parquet board, ceramic tiles;

k) interior decoration of premises - plaster, painting, wallpaper, natural wood; bathrooms - ceramic tiles;

l) external decoration - end walls made of ceramic brick;

General characteristics of the building.

According to the volume planning solution, the class of this building is II, the degree of durability is II, the degree of fire is II.

Designed:

Ground floor height 3,000m

Height of the entire building 17.880 m

Dimensions in axes 14: 17.400 m

A-B: 12,000m

Building area: 240.62m2

Building volume: 4302.29 m3

Constructive solution

4.1. Structural diagram of the building.

Structural diagram of the building is framed, with longitudinal and transverse bearing walls. Spatial rigidity of the building is ensured by rigid connection of internal walls with external walls, grouting of seams with slabs and installation of steel anchors connecting slabs with walls and slabs with each other .

Exterior and interior finishes

Exterior trim:

- silicate brick with decryption of seams, plaster;

Basement - stone plaster, sandstone cladding.

Interior trim:

- san nodes - tiles

- dining room and hall - wooden cladding

-coridors - plaster

Engineering equipment

Water supply - domestic, design head at the base of risers of 25m water.

Sewerage - economic and fecal with release into the city network;

Heating - water section, single-tube system with radiators of type "M140AO."

Ventilation is natural in combination with the installation of electric fans and ventilation chambers.

Hot water supply - from the external network.

Drains - internal with discharge into the common sewage system.

Electrical lighting - from external mains, voltage 380/220v.

Gas supply - from the external network.

Power supply - from the external environment, voltage 380/220 V.

Communication devices - telephone, radio television.

макаров.dwg