General view of MSS 300 mill

Continuous shallow mill 300 is designed for rolling rebar according to technical requirements of TU 5510 RK 39047093 LLP-002-2004. The mill consists of the following units and assemblies: Workpiece loading table. Designed to load blanks into the furnace. Hydraulic pusher with drowning stops. Blanks are stacked in one row. Hydraulic control, ejector force 1500 kN. Length - 3.5 m, width - 11 m. The number of cylinders is 2. Ejector speed - 50 mm/s. Cylinder stroke - 1000 mm. The mill is loaded by a bridge crane with a lifting capacity of 10 tons. Heating furnace. Pushing type is intended for preforms heating before rolling in mill. Furnace dimensions: internal length - 14000 mm; internal width - 10600 mm; inner height - 1 m. Movement of blanks inside the furnace in one row. Fuel - liquefied gas. Nominal calorific value - 25,000 kcal/kg. Two zones (heating and holding), 12 burners (6 side, 6 end). Transfer of blanks inside the furnace: in one row of blanks 10000 mm. Furnace capacity - 50 t/h. Ejector. It is intended for ejection of heated blanks. It consists of a motor, a reduction gear box, a sectional ejection stop. The ejector is controlled from the control panel. Ejector speed - 1 m/s. Reception roller table. Designed to receive heated blanks and transfer to the discharge roller table. Consists of chute, rollers, shock absorber. It is controlled from the PU of the camp.