Cargo atp for 210 cars

Contents

Contents

Page

Introduction

Enterprise Process Calculation

Input Data for Process Calculation

Settlement of Maintenance and Repair Production Program

Correction of maintenance and mileage intervals prior to vehicle write-off

Calculation of the production program for maintenance and diagnostics of the car

Calculation of annual scope of work

Correction of standard labour intensity of maintenance and maintenance

Calculation of annual scope of maintenance and maintenance works

Calculation of the annual scope of self-service of the enterprise

Distribution of annual scope of work for maintenance, maintenance and self-service of the enterprise

Calculation of labour intensity of diagnostic works

Calculation of annual scope of workshop works

Calculation of the number of production and auxiliary workers

Calculation of number of diagnostic, maintenance and maintenance posts

Area Calculation

Study of the engine department

Conclusion

List of used literature

Introduction

The efficiency of road transport depends to a large extent on the technical readiness of the rolling stock, which is ensured by the timely and high-quality performance of technical services and repairs. Of all modes of transport, road is the most labor-intensive and phondom-intensive. Every year, its technical maintenance is affected by huge funds. Despite this, the technical and economic performance of the car fleet is increasing extremely slowly.

One of the main reasons for this situation is the lag in the development and improvement of the production base of motor transport enterprises from the growth rate of rolling stock. For efficient operation and maintenance of rolling stock, it is necessary not just new, but qualitatively new enterprises.

Thus, it is necessary to further develop the production and technical base of road transport, providing for the construction of new, expansion, technical re-equipment and reconstruction of existing automobile repair enterprises. These tasks are solved primarily in the process of high-quality design of ATP, which provides for the development of the most rational planning of production departments. application of progressive forms and methods of maintenance and maintenance of rolling stock, a high level of mechanization of production processes, use of modern means of diagnosing the technical condition of cars, scientific organization of labor.

Enterprise Process Calculation

Input Data for Process Calculation

number of cars - 210 pieces

average daily mileage - 320 km

number of working days per year - 305 days

category of operating conditions - 3

operating hours of maintenance and maintenance zones - 8 hours

Car dimensions: 6195x2319x2365

Conclusion

During the project, a set of technical, organizational and design tasks were solved in the field of organization and technology of maintenance and repair of rolling stock. As well as mastered the methods of technological calculation, the basis of design and organization of production, acquired the skills of using special and reference literature.

As a result of this course project, the production building of the taxi fleet for 210 ZIL5301 cars and the TR zone were designed. 

Зона ТР.cdw

Зил 5301.cdw