Technological scheme of slag Portland cement production

Course project on the discipline "Binders"
On the topic: "Technological scheme of slag Portland cement production"
 

Source data:
- Slag Portland cement (SHPC): grade M400, density 2.85 g/cm3
- raw materials: to provide for the use of blast furnace slag
- Production method: dry

This paper discusses the technology of slag Portland cement production using the dry method. Based on the initial data, raw materials are selected, material and phase composition are calculated. The technological line is considered in more detail, the equipment is rationally selected. Calculations of the material balance and operating mode of the enterprise are presented.
The graphic part contains a technological scheme for the production of slag Portland cement by the dry method.

CONTENT
Introduction
1 Characteristics of Slag Portland Cement
1.1 Composition and properties of slag Portland cement
1.2 Hydration and hardening of cement
1.3 Areas of application of cement
2 Raw materials
2.1 Rationale for the selection and characteristics of raw materials
2.2 Calculation of the composition of the raw material mixture for cement clinker
3 Technological scheme of slag Portland cement production
3.1 Substantiation of the choice of the method of cement production
3.2 Substantiation of the technological scheme of cement production
3.3 Structure and mode of operation of the enterprise
3.4 Description of the technological scheme of cement production
3.4.1 General information on production technology
3.4.2 Extraction and preparation of raw materials
3.4.3 Preparation of the raw material mixture
3.4.4 Firing of raw material mixture
3.4.5 Grinding cement clinker
3.4.6 Storage and shipment of cement to the consumer
3.5 Methods of control of the properties of raw materials, technological process, quality of cement
4 Drawing up a material balance and calculating the consumption of raw materials for the output of a given product
Conclusion
References