Sand and gravel filter (fast)

Added: 14.04.2018
Size: 246 KB
Downloads: 2

Find out how to download this material

Telegram bot for searching materials

Drawings purchasing

Subscribe to receive an information about new materials:

t.me/alldrawings

vk.com/alldrawings

Description

Rated capacity, m3/h 80 Recommended capacity, m3/h 60-96Filter surface area, m2 1,28Pressurization pressure (not more than), kgf/cm2 8.00 Pressure loss on filter requiring washing, kgf/cm2 0.5-0.8Fraction of loaded gravel, mm 1-2Accessable amount of gravel, kg 600Manifold diameter, mm/inch Inlet (flange) 100/4Volving (thread) 100/4Symetric dimensions, mmLength 2080Shire 840High 1600Mass, kg (excluding gravel) 280The principle of action of sand-gravel filter FG-80The filter principle is based on the passage of contaminated water through the layer of calibrated sand of a certain fraction. Contaminants are retained on the surface of the sand particles, and the purified water goes to the final filtration. When the filter is contaminated, it is washed with a reverse stream of water. The filter sections are washed alternately. Water filtered by another section is supplied for washing of each section. Each filter section can be operated individually or in parallel, so that the washing of the filter can be carried out with the watering on.