Safety valve KIGD.ХХ0Х07.000
- Added: 04.04.2023
- Size: 551 KB
- Downloads: 1
Description
Safety valve KIGD.ХХ0Х07.000 in KOMPAS assembly drawing + specification
Safety valve. KIGD.XX0X07.000 Task 1. Redraw the given images on a scale of M 1: 1 with thin lines on the A2 (A1) format without hatching, lines - callouts and position numbers. 2. Draw connections (the position of the fasteners is indicated by the axes): a) body 1 and flange 2 using M12 bolts GOST 7798-70, nuts Ml2 GOST 5915-70, washers 12 GOST 6402-70, pos. 11,14,17; b) body 1 and flange 8 using M10 studs GOST 22032-76, GOST 5915-70 nuts MU, GOST 6402-70 washers 10, pos. 13,15,17 (body material-cast iron); c) body 1 and cap 7 with M8 screws GOST 17475-80, pos. 12. 3. Hatch the cuts. 4. Draw leader lines to all details. 5. Draw up a specification on separate sheets of A4 format. 6. Put down the item numbers according to the specification. 7. Put down the required dimensions on the assembly drawing. Outline the drawing.
Project's Content
СПЕЦИФИКАЦИЯ Клапан предохранительный КИГД.ХХ0Х07.000.cdw
|
Клапан предохранительный КИГД.ХХ0Х07.000.cdw
|
Additional information
СПЕЦИФИКАЦИЯ Клапан предохранительный КИГД.ХХ0Х07.000.cdw
Клапан предохранительный КИГД.ХХ0Х07.000.cdw
Similar materials
- 04.11.2022