Rubber mixing rollers SM 1500 660/660
- Added: 06.06.2023
- Size: 140 KB
- Downloads: 0
Description
General view of rollers SM 1500 660/660
Technical requirements
1. The productivity of the rollers is 80 kg/cycle.
2. Number of rolls - 2 pcs.
3. The diameter of the working part of the roll is 660 mm.
4. The length of the working part of the roll is 1500 mm.
5. The hardness of the working surface of the rolls is HRC 42..55.
6. The depth of the bleached layer in the processed roll is 10..25 mm.
7. The working surface of the rolls is smooth.
8. The working speed of the rear roll is 34.5 m/min.
9. The maximum working gap between the rolls is 10 mm.
10. The lubrication system of roller bearings is centralized.
11. The mechanisms for adjusting the gap between the rolls are individual.
12. Reducer (drive) - KC = 60, і = 10.375.
13. Drive motor - AOZ-315m-6, N = 132 kW.
14. Friction - 1.07.
Project's Content
Общий вид .cdw
|
