Reorganization of the production site for vehicle maintenance in the conditions of Transaccord JSC, Novosibirsk

In this final qualification work, the production site for vehicle maintenance was reorganized in the conditions of Transaccord JSC in Novosibirsk due to the fact that the company had a maintenance zone with obsolete equipment, and some types of work were not carried out at specialized posts.

In the work, an annual program of maintenance work was determined. In accordance with the data obtained on the annual volume, the required number of work posts was determined, and the number of production workers was established to perform a set of maintenance works. The site was redeveloped for maintenance with the arrangement of technological equipment, which increased the level of quality of maintenance and safety.

As a design installation, an inertial lift for hanging cars was developed and calculated. Also in this chapter, an assessment of the economic efficiency of the manufactured structure was carried out. The cost of the resulting installation is lower in comparison with similar samples, which confirms its economic feasibility.

Introduction. 5

1. Selection of the design object. 7

2. Analysis of the production and economic activities of the enterprise JSC "Transaccord". 9

2.1 Activities of the company JSC "Transaccord". 9

2.2 Material and technical base. 11

2.3 Use, maintenance and storage of ICC.  17

3. Justification of the topic of the thesis. 20

4. Calculation and technological part. 22

4.1 Initial data for calculation. 22

4.2 Determination of the number of production workers. 30

4.3 Development of the layout of the production site. 31

5. Design part. 36

5.1 Rationale for the choice of design. 36

5.2 Analysis of existing structures. 36

5.3 Description of the design. 40

5.4 Design calculations..  44

5.5 Calculation of costs for the manufacture of design development. 49

6. Life safety. 56

6.1 Safety of the technological process of maintenance..  57

6.2 Calculation of the lighting of the maintenance zone..  59

6.3 Safety of design development. 62

6.4 Chapter Conclusions. 63

Conclusion. 64

Bibliography  65