• RU
  • icon Waiting For Moderation: 3
Menu

Plate Conveyor Drive Station Design

  • Added: 27.02.2017
  • Size: 981 KB
  • Downloads: 3
Find out how to download this material

Description

In the design of the drive, use a two-stage cylindrical reduction gear with a bifurcated slow-moving stage. The designed machine unit serves as a drive to the plate conveyor. Drive consists of electric motor whose shaft is connected through elastic clutch to drive shaft of double-flow cylindrical reduction gear. A sprocket of vertically located chain transmission is fitted on the driven shaft of the reduction gear, which drives the traction chains of the plate conveyor. Design input: pipeline load constant; value of starting moment is assigned by technical characteristic of selected electric engine; t = 10 years; Kg = 0.4; Ks = 0.33; tmax=1.05c; dimensions of traction chain - GOST 588-81, dimensions of sprocket-GOST 592-81; traction force F=6kH; circuit speed v = 0.9m/s; circuit pitch P = 80mm; number of sprocket teeth z = 10. In the graphic part of the project developed: general view of the drive; reduction gear box; coupling; Detail working drawings.

Project's Content

icon
icon Вал-шестерня ведущий А.pdf
icon Колесо зубчатое м=1.pdf
icon Колесо зубчатое м=1 А.pdf
icon Муфта А.pdf
icon Общий вид привода.pdf
icon Редуктор СБ.pdf
icon Спецификация общего вида.pdf
icon Спецификация редуктор.pdf
icon Диаграмма.docx
icon ПЗ Последняя.docx
icon Вал-шестерня ведущий А.cdw
icon Вал-шестерня ведущий с вопр.cdw
icon Колесо зубчатое м=1 А.cdw
icon Муфта А.cdw
icon Общий вид привода А.cdw
icon Редуктор СБ.cdw

Additional information

Contents

Terms of Reference

Kinematic diagram of machine unit

Selection of gear materials and

definition of allowable stresses

Calculation of low-speed drive stage

Calculation of high speed drive stage

Gear shaft loads

Design calculation of shafts. Sketched Layout

reducer

Selection and check calculation of keys

Selection and check calculation of bearings

Calculation of chain transmission

Selection of oil, lubricants

List of literature

Terms of Reference

for the course project on Machine Parts

design a plate conveyor drive station (see Atlas

structures "Transporting machines" Spivakovsky A.O.S. and others.

publishing house "Engineering," 1992).

In the design of the drive use two-stage

cylindrical reduction gear with bifurcated slow-moving stage by type,

shown in Fig. 1, p. 146 Atlas of structures "Machine parts" under

editors D.N. Reshetov, publishing house "Mechanical Engineering," 1979.

Design Input:

the load on the conveyor is constant; starting moment value is assigned

by technical characteristic of the selected electric engine; t = 10 years; Kg = 0.4;

Ks = 0.33; tmax=1.05c; dimensions of traction chain - GOST 58881, dimensions of sprockets -

GOST 59281; traction force F =6kH; circuit speed v = 0.9m/s; circuit pitch P = 80mm; number of sprocket teeth z = 10.

In the graphic part of the project, develop:

general view of the drive; 2) reduction gear box; 3) coupling; Detail working drawings.

Drawings content

icon Вал-шестерня ведущий А.pdf

icon Колесо зубчатое м=1.pdf

icon Колесо зубчатое м=1 А.pdf

icon Общий вид привода.pdf

icon Редуктор СБ.pdf

icon Спецификация общего вида.pdf

icon Спецификация редуктор.pdf

icon Вал-шестерня ведущий А.cdw

Вал-шестерня  ведущий А.cdw

icon Вал-шестерня ведущий с вопр.cdw

Вал-шестерня  ведущий с вопр.cdw

icon Колесо зубчатое м=1 А.cdw

Колесо зубчатое м=1 А.cdw

icon Муфта А.cdw

Муфта А.cdw

icon Общий вид привода А.cdw

Общий вид привода А.cdw

icon Редуктор СБ.cdw

Редуктор СБ.cdw

Free downloading for today

Update after: 14 hours 40 minutes
up Up