Lunet accessory with rotating self-centering cartridge
- Added: 22.06.2018
- Size: 184 KB
- Downloads: 2
Description
Accessory is intended for fixation of parts during machining on lathes. It is used to bore holes in pipes that are not treated on the outer surface. Contents: 1. Design section2. The device has a lunet with a rotating self-centering cartridge 3. Detail of accessor4. Specification Composition: Lunette with Rotating Self-Centering Cartridge (SS), Detail (Plank, Base, Plank, Housing, Flange, Cover, Cover, Ring), Specification.
Project's Content
|
|
деталировка приспособление.frw
|
КОНСТРУКТОРСКИЙ РАЗДЕЛ.docx
|
приспособление Люнет с вращающимся самоцентрирующим патроном.cdw
|
спецификация 1.cdw
|
спецификация 2.cdw
|
Additional information
1 design section
1.1 Description of device and operation of accessory
Accessory is intended for fixation of parts during machining on lathes. It is used to bore holes in pipes that are not treated on the external surface
Adaptation consists of the flange (1), nuts (2), a cover (3), butterdishes 1M10x1 (4), consolidations (5), covers (6), the bearing rolikouporny No. 7218 (7), a ring (8), the case (9), consolidation (10), a bolt of M12x35 (11), a level (12), the basis (13), a nut of M20 (14), a washer 20 (15), a bolt of M20x110 (16) and a level (17).
The workpiece is secured in the cams of a self-centering chuck which is bolted 11 to a flange 1 which rotates on roller bearings 7.
1.2 Short instruction for operation with the accessory
Depreserve the lathe cartridge, familiarize yourself with the certificate for the article.
Attach the cartridge to the machine, tightening all bolts and checking the reliability of the attachment.
деталировка приспособление.frw
приспособление Люнет с вращающимся самоцентрирующим патроном.cdw
спецификация 1.cdw
спецификация 2.cdw