KAMAZ engine calculation 740 - 10
- Added: 22.03.2015
- Size: 636 KB
- Downloads: 1
Description
Project's Content
|
расчет.doc
|
Камаз 740 поперечный.dwg
|
Камаз-740 (продольный разрез).dwg
|
Additional information
Contents
Contents
Introduction
Calculation of basic parameters of diesel engine
Calculation of engine unit parameters (nozzle)
Vehicle transmission (KamAZ 5511)
Definition of vehicle characteristics
a) Calculation of external speed characteristic of the engine
b) Calculation of vehicle speeds
c) Calculation of traction characteristic
d) Calculation of dynamic factor of the car
e) Calculation of fuel economy
List of literature
Introduction
The importance of the course project in studying the discipline "internal combustion engines cars and tractors" is due to the field of activity of the future mechanical engineer in lifting, construction, road vehicles.
The purpose of the design is to acquire knowledge of the elements that form the efficiency of engines, and the skills of their use in improving structures, as well as the skills to consider the results obtained from the points of view of operation, maintenance and repair of machines in specific conditions.
The initial data are the type and power of the engine, as well as the speed of the crankshaft at maximum torque and at maximum power, the remaining data are selected independently.
In this course design, my KamAZ 74010 engine was considered.
Kinematic diagram (KamAZ 5511)
On the KamAZ 5511 car, torque from the engine is transmitted through the clutch to the gearbox and from it through the gearbox to the transfer gearbox. From the transfer box through the axle differential, which is located inside the crankcase of this box, torque is distributed between the front driving bridge and driving bridges. The transfer box is simultaneously an additional gearbox that doubles the number of possible gears and increases the limits of changing gear ratios in the transmission. Inside each drive axle, torque is transmitted through the main gear, inter-wheel differential and drive shafts to the drive wheels. To increase cross-country capacity, the KamAZ 5511 car is equipped with a winch located in the aft part of the car. Drive to winch is performed from power take-off box, which is installed on transfer box.
Камаз 740 поперечный.dwg
Камаз-740 (продольный разрез).dwg
Similar materials
- 24.05.2016
Free downloading for today
Other materials
- 23.08.2014