Housing Part
- Added: 17.01.2018
- Size: 74 KB
- Downloads: 0
Description
housing part The housing is made of aluminium deformable alloy of AMG6 grade GOST 21488-97 considering the configuration, we accept stamping as a workpiece. The body is a part that serves to attach other parts to it and protect them from damage. The part with a height of 41h11 consists of two hubs: the first hub with a height of 25h13, a diameter of 29H9, the second hub with a diameter of 26mm and a height of 11mm, and a conical flange with two sides, a width of 70mm, the largest diameter of which is 30mm. The flange has three fixing holes, on its lower side there is a shaped recess with a radius of 7 and a height of 3 mm. The inner surface of the hull is multi-stage, begins with a chamfer of 1 × 45 °, and at the first stage of the inner contour there is a key for the entire length of the stage, 2h13 wide. Inner contour of housing ends with cone of 20 ° roughness of which is equal to 2.5 mcm
Project's Content
detal-chertezh.cdw
|
Additional information
detal-chertezh.cdw
