Develop a technological process for manufacturing the Case

1. Course Project Topic: "Develop a Manufacturing Process for a Hull."

2. Project Initial Data: Working Drawing of the Part, Technical Drawing Requirements, Assembly Drawing of the Unit, Annual Production Program of 1,000 Units/Year, Production Period of 2 Years.

3. Explanatory Note Contents: Introduction, 1. Analysis of Initial Data, 2. Development of the Manufacturing Process for the Part, 2.1. Determining the Production Type, 2.2. Analysis of the Manufacturability of the Part Design, 2.3. Selecting the Manufacturing Method and Designing the Blank, 2.4. Selecting the Process Bases, 2.5. Assigning Surface Machining Routes, 2.6. Assigning the Machining Route for the Part, 2.7. Calculating Allowances and Inter-Transition Dimensions, 2.8. Selecting Equipment, Tooling, and Fixtures, 2.9. Calculating Cutting Modes, 2.10. Calculating Standard Time, Conclusion. Appendix A: Process Process Documentation Set.

4. List of graphic materials: Drawing of the part – 0.5 A1 sheet Drawing of the workpiece – 0.5 A1 sheet Operational sketches – 2 A1 sheets