Develop a technological process for manufacturing part Housing
- Added: 13.04.2022
- Size: 11 MB
- Downloads: 5
Description
In this work, it is required to develop a technological process for manufacturing the "Corpus" part.
The "Hull" part is used to place parts of machines and assembly units in them. The part refers to the rotation bodies of the housing type. It has a stepped design with internal holes and threads.
Details "Body" has overall dimensions of 285x400x140. The maximum diameter in the body is 220 mm, the minimum is 100 mm. The shape and overall dimensions of the part are such that a lathe and carousel machine is acceptable for its processing.
INTRODUCTION
1 TECHNOLOGICAL PART
1.1 Analysis of source data for design
1.2 Design and technological characteristics of the part
1.3 Determination of the type of production
1.4 Analysis of the manufacturability of the part
1.5 Choosing the method of obtaining the workpiece
1.6 Technological process of part processing
1.7 Selection of equipment, tools and machine tools
1.8 Analytical calculation of processing allowances
1.9 Calculation of cutting modes
1.10 Rationing of operations
2 CONSTRUCTION SECTION
3 ORGANIZATION OF PRODUCTION IN THE WORKSHOP, LAYOUT AND TRANSPORT
3.1 Organizational structure of the workshop
3.2 Main production
3.3 Determination of the composition and number of employees
3.4 Support units
3.5 Shop transport
3.6 Service facilities
4 ECONOMIC PART
CONCLUSION
REFERENCES
Project's Content
|
|
заготовка_корпус.cdw
|
заготовка_корпус.jpg
|
|
карта наладки_010корпус.cdw
|
|
карта наладки_010корпус.jpg
|
|
карта наладки_015_корпус.cdw
|
|
карта наладки_015_корпус.jpg
|
|
Копия чертеж участка_корпус.cdw
|
|
Копия чертеж участка_корпус.jpg
|
|
Корпус.cdw
|
|
Корпус.jpg
|
Корпус.m3d
|
ПЗ_Корпус.docx
|
|
приспособление_корпус(1).jpg
|
|
приспособление_корпус(2).jpg
|
|
приспособление_корпус(3).jpg
|
|
приспособление_корпус.cdw
|
|
|
|
КЭ.docx
|
|
МК и ОК корпус.docx
|
|
Титульный лист.docx
|
|
Тех процесс_корпус.cdw
|
|
Тех процесс_корпус.jpg
|
Additional information
заготовка_корпус.cdw
карта наладки_010корпус.cdw
карта наладки_015_корпус.cdw
Копия чертеж участка_корпус.cdw
Корпус.cdw
Корпус.m3d
ПЗ_Корпус.docx
приспособление_корпус.cdw
МК и ОК корпус.docx
Титульный лист.docx
Тех процесс_корпус.cdw
