Design of the machine shop section for machining the shaft-gear part
- Added: 02.06.2022
- Size: 2 MB
- Downloads: 2
Description
CONTENT.
INTRODUCTION
1. GENERAL SECTION.
- Description of the design. The official purpose of the part.
- Technological control of the drawing of the part and analysis
details for manufacturability.
- TECHNOLOGICAL SECTION.
- Characteristics of a given type of production.
- Selection of the type and justification of the method of obtaining the workpiece.
- Selection of general allowances and tolerances for machining. Calculation of the mass of the workpiece and the coefficient of material use.
- Selection and substantiation of technological bases.
- Development of a route plan for processing the part with the choice of equipment and machine tools. Justification of the adopted route plan and characteristics of the equipment.
- Element-by-element process of part processing.
- Determination of operating allowances and sizes:
2.7.1. Calculation of interoperative allowances and dimensions on the surface by analytical method.
2.7.2. Appointment of allowances for processing in a tabular manner.
- Selection of cutting auxiliary and measuring tools for process operations.
- Selection of rational cutting modes and determination of time norms for machining operations.
- DESIGN SECTION.
3.1 Description of the device and the principle of operation of the machine tool for the operation
3.2 Calculation and construction of the device
3.3 Calculation and design of the worm modular cutter for the operation
3.4.Organization of technical control at the site. Calculation of actuating dimensions of the gauge bracket for dimensional control
- ORGANIZATIONAL SECTION.
4.1. Determination of the required amount of equipment, its loading
4.2 Calculation and organization of multi-machine maintenance at the site. Composition and calculation of the number of participants in production, taking into account multi-machine maintenance.
4.3 Layout of equipment and calculation of required production areas
4.4 Transportation of the part on site
4.5 Organization of equipment repair at the site
4.6 Ensuring normal working conditions and safety at the site.
4.6.1 Calculation of ventilation and lighting on the site
4.6.2 Electrical and fire safety
4.7 Environmental protection
4.8 Disposal of production waste from the site
- ECONOMIC SECTION.
- Calculation of the cost of fixed working capital of the site
- Determination of the payroll fund for employees
- Calculation of general and general production expenses
- Determination of the cost of the part, calculation and cost estimate.
5.5 Business Summary Statement
- CONCLUSION
6.1. Feasibility study of business efficiency of the project.
Bibliography
Project's Content
|
|
DP_Baev_Ekonomika.docx
|
График загрузки, план участка.frw
|
|
деталь, и загатока.frw
|
|
|
записка.doc
|
|
|
|
|
|
деталь, и загатока.frw
|
|
|
|
карты наладок.frw
|
|
РТК.frw
|
|
|
|
приспособление зубофасочное.frw
|
|
|
калибр скоба 05.cdw
|
|
Фреза червячная м=4,5.cdw
|
|
|
|
График загрузки, план участка.frw
|
|
калибр скоба 05.cdw
|
|
карты наладок.frw
|
|
контрольное.frw
|
|
приспособление зубофасочное.frw
|
|
РТК.frw
|
|
спецефик для контрольного.doc
|
|
|
Ведомость ДП.spw
|
|
График загрузки, план участка.doc
|
|
спецефик для приспособление зубофасочное.doc
|
|
|
|
допуски на пробки.frw
|
|
карта эскизов 040.frw
|
|
карта эскизов 045.frw
|
|
карта эскизов 065.frw
|
|
карта эскизов005.frw
|
|
Операционная 005.doc
|
|
Операционная 040.doc
|
|
Операционная 045.doc
|
|
Операционная 065.doc
|
|
тех.процесс.doc
|
|
техконтколь125.doc
|
|
Титульник.doc
|
|
эскиз контроля 2лист .frw
|
|
эскиз контроля.frw
|
|
|
|
2.frw
|
|
Фрагмент п.3,2.frw
|
|
Фрагмент.frw
|
|
Фреза, карты наладок.frw
|
Additional information
График загрузки, план участка.frw
деталь, и загатока.frw
деталь, и загатока.frw
карты наладок.frw
РТК.frw
приспособление зубофасочное.frw
калибр скоба 05.cdw
Фреза червячная м=4,5.cdw
График загрузки, план участка.frw
калибр скоба 05.cdw
карты наладок.frw
контрольное.frw
приспособление зубофасочное.frw
РТК.frw
Ведомость ДП.spw
допуски на пробки.frw
карта эскизов 040.frw
карта эскизов 045.frw
карта эскизов 065.frw
карта эскизов005.frw
эскиз контроля 2лист .frw
эскиз контроля.frw
2.frw
Фрагмент п.3,2.frw
Фрагмент.frw
Фреза, карты наладок.frw
