Design of a machine shop section for the production of a part "Intermediate gear with a bushing" using CNC machines
- Added: 11.03.2024
- Size: 3 MB
- Downloads: 2
Description
GRADUATION PROJECT
Design of a machine shop section for the production of a part "Intermediate gear with a bushing" using CNC machines
Consists of 9 drawings
technical documents (Sketch Maps, Operation Maps, Route Maps)
Content
Contents
Introduction. 5
1 Description of the object of production. 7
2 Purpose of the assembly unit and the workpiece. 9
3 Manufacturability analysis. 12
3.1 Qualitative assessment of manufacturability. 13
3.2 Quantification of manufacturability. 14
4 Basic Process Analysis. 16
5 Process Design. 21
5.1 Determination of the type and organizational form of production. 21
5.2 Selection of the method of obtaining the workpiece. 24
5.2.1 Analysis of workpiece production methods. 24
5.2.2 Economic justification of the method of obtaining the billet. 25
5.3 Selection of the option of the technological route of machining at the minimum present cost. 26
6 Design of machining operations. 29
6.1 Assignment and calculation of allowances and dimensional limits. 29
6.2 Calculation of cutting data 33
6.2.1 Analytical calculation of cutting data 33
6.3 Calculation of the technical time standard.
6.4 Determination of the required amount of equipment and construction of load diagrams.
7 Machine tool design.
7.1 Selection of the type and type of fixtures.
7.2 Force and precision calculation of the fixture.
8 Design of cutting and auxiliary tools.
8.1 Selection of cutting and auxiliary tools.
8.2 Calculation of the cutting tool.
8.2.1 Determination of structural elements and geometrical parameters of the cutter.
8.2.2 Determination of the dimensions of the cutter profile in the normal cross-section.
Conclusion.
Literature.
Project's Content
037.docx
|
(А2)Втулка _ 4753430034 240-1006246.cdw
|
|
050.docx
|
|
Спец приспособ.docx
|
|
Записка.docx
|
Komplekt_dokumentov_na_TP_mekhanicheskoy_obrabotki.doc
|
|
МК.docx
|
|
Аннотация МС.docx
|
|
Титульный лист.docx
|
|
Аннотация МС-18 каз.яз -.docx
|
|
(А1)Приспособление для хонингования Сборочный чертеж _ 7476-5047 СБ.cdw
|
|
045.docx
|
|
030.docx
|
|
Задание на дипломирование (2).docx
|
|
040.docx
|
|
(А2)Шестерня промежуточная со втулкой Сборочный чертеж _ 260-1006240 СБ.cdw
|
|
Аннотация МС-18 на английский -.doc
|
|
(А1)Планировка участка.cdw
|
|
(А2)Фреза червячная _ 2510-5082.cdw
|
|
(А1)ТЭП _ БНТУ-10312810-2013.cdw
|
|
020.docx
|
|
Специф шестерня.docx
|
|
(А3)Шестерня промежуточная (поковка) _ 260-1006244-В.cdw
|
|
010.docx
|
|
005.docx
|
|
015.docx
|
|
025.docx
|
|
(А1)Операционные эскизы(1).cdw
|
|
035.docx
|
|
(А1)Операционные эскизы(2).cdw
|
|
006.docx
|
Additional information
(А2)Втулка _ 4753430034 240-1006246.cdw
(А1)Приспособление для хонингования Сборочный чертеж _ 7476-5047 СБ.cdw
(А2)Шестерня промежуточная со втулкой Сборочный чертеж _ 260-1006240 СБ.cdw
(А1)Планировка участка.cdw
(А2)Фреза червячная _ 2510-5082.cdw
(А1)ТЭП _ БНТУ-10312810-2013.cdw
(А3)Шестерня промежуточная (поковка) _ 260-1006244-В.cdw
(А1)Операционные эскизы(1).cdw
(А1)Операционные эскизы(2).cdw
Similar materials
- 28.02.2024
- 27.05.2024
- 24.01.2023
