Design of reinforced concrete frame of industrial building

Contents

1. Calculation of cross frame of one-storey industrial building

1.1. Design Diagram and Design Diagram

1.2. Determination of loads on the machine

1.2.1. Constant load

1.2.2. Snow load

1.2.3. Load from bridge frames

1.2.4. Wind load

1.3. Static calculation of ra-we

1.3.1. Assigning Cross Section Dimensions

1.3.2. Single movement of the main system

1.3.3. Load constant load

1.3.4. Loading of snow load

1.3.5. Crane loading Mmach of extreme column

1.3.6. Crane load load Mmach middle column

1.3.7. Braking force loading of the extreme column

1.3.8. Braking force loading of the middle column

1.3.9. Loading of wind load

1.4. Compilation of the table of calculated forces

2. Calculation and design of out-of-center compressed colonnes

2.1. Rectangular Section Columns

2.1.1. Calculation of the over-crane part of the extreme column

2.1.2. Calculation of the crane part of the extreme column

2.2. Two-branch columns

2.2.1. Calculation of the above-crane part of the middle column

2.2.2. Calculation of the crane part of the middle column

2.3. Calculation of intermediate alignment

3. Calculation and design of rafters

3.1. Determination of FFM Loads

3.1.1. Constant load

3.1.2. Snow load

3.2. Defining Forces in Truss Elements

3.3. Calculation of the lower belt for strength and crack-bone

3.4. Calculate Top Chord and Other Elements per Meter

3.4.1. Top Field Calculation

3.4.2. Calculation of the first rasco-sa

4. Overall stability of the facility

Literature

лист2.cdw

лист1.cdw