Complex overhaul of the building of the State Educational Institution of Secondary School No. 319 in Petrodvorets

Contents

1. Basis of Design

2. Regulatory documentation

3. General Data

4. Technological solutions

4.1. Organization of the educational process

4.1.1. Training rooms

4.1.2. Assembly hall

4.1.3. Gym

4.2. Organization of student meals

4.3. Health center

5. Waste

6. Engineering systems

6.1. Power supply

6.2. Low-current systems

6.3. Water supply and sewerage

6.4. Heating and ventilation

7. Interior decoration of rooms

8. Equipment

9. Personnel composition and working conditions

10. Fire safety

11. Health and Safety

4. Technological solutions

4.1. Organization of the educational process.

The building of the secondary school has a U-shape..

Classrooms of the primary school are designed on the second floor in the central part of the building, and classrooms of the main and high schools - on the third and fourth floors in the central part of the building, on the first floor in the left wing of the building on is an assembly hall, in the right - a sports hall, in the center of the building on the left - a school dining room, in the center of the building on the right - a gym, in the center of the building in axes 916 - a vestibule horderobic group. rooms .

The presented zoning provides isolation of the primary school educational unit from the primary and high school educational unit.

Students will enter the building through the lobby 146, where students change shoes, then take off their outerwear in the wardrobes of primary and secondary schools 138 and 139 and go to the classrooms.

The passage of the teaching staff to the building will be carried out through the lobby 146, after which teachers go to the teacher's room 223 or other administrative rooms of the central block of the second floor, where they take off their outerwear, and then go to work places.

Adjacent to the lobby room 146 is a security post room 148.

In the right wing of the first floor, in the immediate vicinity of the entrance group of premises, the office of the director with the reception room and the office of the deputy director for the AHCH are designed.

4.1.1. Study rooms.

GOU elementary school No. 319 consists of two parallels, 8 classes. For each class, the project provides a separate classroom.

Admission to primary school is strictly carried out from the age of 7, sleeping spaces for junior schoolchildren are not necessary.

All elementary classrooms are designed for equipment according to modern requirements for equipping elementary school classrooms (when selecting equipment, etc., the territorial norms of St. Petersburg, federal norms, recommendations for equipping the educational rooms of the Ministry of Defense Science are taken into account).

The main and high schools consist of three parallels and two parallels, grades 15 and 4, respectively .

For the main and high schools, there are 7 + 4 general classrooms (in which, in addition to classes in the subject, mainly held in the classroom, classes in any other subject can also be held, according to the school schedule), as well as specialized classes :

- Chemistry room (with laboratory assistant) on the fourth floor;

- Physics room (with laboratory assistant) on the third floor ;

- Biology room (with laboratory assistant) on the fourth floor;

- Two computer science rooms, a lecture room and a computer class (with a laboratory assistant) on the third floor;

- Lingaphone room on the third floor;

- Premises for girls' work education: sewing shop and kitchen;

All rooms of the main and high school classes are designed for equipment according to modern requirements for equipping these classes (when selecting equipment, etc., the territorial norms of St. Petersburg, federal norms, recommendations for equipping the educational rooms of the Ministry of Defense Science are taken into account).

A feature of the educational process in GOU No. 319 is the completion of labor training by boys at Petrodvorets enterprises located in the immediate vicinity of this educational institution (car repair enterprise, watch factory).

The school library is located in the left wing of the second floor of the building and consists of library funds 208, 209 and a reading room with a subscription 211. The library reading room is equipped with computer equipment to ensure that students work with the library media content and provide students with access to the Internet.

4.1.2. Assembly hall.

The assembly hall of the school is designed for 244 places. The project provides for equipping the stage of the assembly hall with modern domestic stage equipment: an electromechanical curtain, curtains, light and sound equipment. Control of all equipment shall be consolidated into a single console.

To conduct extracurricular (circle) classes with students, a group of rooms located behind the assembly hall was designed.

4.1.3. Sports hall.

For the school gym, the project provides a block of auxiliary rooms: separate locker rooms with showers and bathrooms, coaching, inventory.

In addition to the gym of the school. there is a gym room adjacent to the gym.

4.2. Organization of student meals.

The school dining room with a 132-seat dining room is designed as a dining room working on raw materials and is located on the ground floor of the building.

The premises of the school dining room include a staff wardrobe, unloading room, storage rooms of the dining room, procurement shops of the dining room (vegetable, meat and fish), dining room kitchen (hot, cold shop), washing utensils, dining room.

.

The dining room operates on one shift, six days a week (40 hours), part-time 5 days - from 800 to 1600 with an hour break for lunch, on Saturday from 1000 to 1400 without a lunch break.

Students are catered in the dining room according to the scheme: breakfast - lunch - midday. Staff are not fed in the dining room.

For the estimated situation, we take 100% of students for breakfast and lunch and 100% for primary school meals + 20% for the rest of the students on noon.

We will take the number of conditional dishes at breakfast - 2 per person, at lunch - 3 per person, at noon - 3 per person. The total number of conditional dishes will be 3408, including - at breakfast 1080, at lunch - 1620, at noon - 708.

Accordingly, for calculations, the capacity of the dining room is 3408 conditional dishes, 1316 visitors per day .

The breakfast consists of two dishes - a second dish and a salad.

The calculated lunch consists of three dishes - the first dish, the second dish and salad.

The estimated day for students engaged in the extended day group consists of three dishes: a second dish, salad and dessert.

The school does not provide for its own production of confectionery products.

On Saturday, the dining room does not carry out breakfast leave (primary school is taught for a five-day week) and midday (the extended day group does not function ).

The final assortment of the school canteen should be formed during the commissioning of the canteen by the production manager, taking into account the requirements of MR No. 0100/86050734.

The number of products per student per day is taken according to MR No. 0100/86040734, taking into account the fact that primary school students receive up to 3/5 of the daily diet at school, and primary and high school students receive up to 3/5 of the daily diet .

The delivery of products is carried out twice a week, the maximum shelf life of products is 3 days. The delivery of bread and bakery products, flour, as well as - dairy products and eggs - is carried out daily.

4.3. First-aid post.

The school first-aid post is designed on the second floor.

As part of the school medical center, the doctor's office and procedural are designed. The doctor's office has an independent entrance to the procedural through the tambour.

Additionally, on the third floor, a psychologist's office is provided.

Medical wastes of category B (according to the medical classification of wastes), if any, are placed in a ditch with disinfection, stored separately in a procedural one, where they are stored before their removal by a specialized organization

5. Waste

Drugs to be disposed of

FKKO codes 56100000 00 00 0

Medical waste

Codes FKKO 97000000 00 00 0, 97100000 00 00 0

Medical waste for the subject can be the following conditions: solid (ninth and tenth digits of the code FCCF - 01), liquid (02), paste-like (03), finished product that has lost consumer properties (13), other (99).

The nomenclature of these wastes is as follows: medical wastes of classes B, D (according to the medical classification), decommissioned drugs or medicines with damaged packaging.

The hazardous properties of drug waste can be as follows: toxicity (eleventh and twelfth digits of the code FCCF - 01), the content of pathogens of infectious diseases (05), in any combinations.

The hazard class of medical waste of the school can be from the 5th to the 3rd hazard class.

Waste is collected in the procedural medical room, class B waste is subjected to preliminary disinfection, waste removal is carried out by a specialized organization

Waste of the first hazard class

FKKO code 3533010013011.

Used fluorescent lamps.

Assembled into closed sealed containers. Once filled, they are sealed and stored in one of the technical rooms. In the future, they are exported by specialized enterprises on a contractual basis.

A separate exit is provided for the removal of medical waste from the school building.

Wastes of the fourth to fifth hazard classes

Labour offices (minor waste):

FKKO code 5810110701995

Clipping and scraping of cotton fabrics

FKKO code 1879010001004

Heterogeneous waste paper and cardboard

Waste is taken out through a separate exit to the container site, where it is collected in specialized containers of types, from where the waste is removed by a specialized enterprise on a contractual basis once a day.

School canteen:

Food Production Waste

FKKO codes 1110000000000

For the storage of wastes of this type, a medium-temperature waste chamber is provided.

Removal of this type of waste is carried out by a specialized enterprise on a contractual basis once a day.

Garbage

FKKO code 9120040001004

Garbage from household premises unsorted

Household waste is collected in garbage baskets, in disposable bags and taken manually to containers intended for collecting waste of this class and located in the adjacent area.

Removal of this type of waste is carried out by a specialized enterprise on a contractual basis once a day.

Waste water treatment and wastewater treatment.

See "Environmental Protection" section of the project documentation.

6. Engineering systems

6.1. Power supply

Electrical power supply of the facility shall be designed based on total power consumption.

To receive the general power of energy consumption from the section TX, CO and from the scheme of arrangement of the equipment attached to a task.

To receive placement of the energy-requiring equipment from the section TH, after its coordination with the customer. According to this arrangement, 380 V and 220 V networks should be wired, as well as 42 V networks for chemistry and physics rooms.

Within the facility, the following types of lighting should be provided: general, working, emergency, evacuation and local .

Provide general lighting in all rooms with appropriate lighting fixtures selected according to the purpose of the rooms.

General lighting shall be used in the training rooms. Luminaires with fluorescent lamps are located parallel to the light-carrying wall at a distance of 1.2 m from the outer wall and 1.5 m from the inner wall.

The classroom board is equipped with soffits and illuminated by two parallel mirror lamps of LPO3 type 0-40-122 (125). The specified lamps are placed above the top edge of the board by 0.3 m and by 0.6 m towards the class in front of the board.

When designing an artificial lighting system for training rooms, it is necessary to provide for separate switching on of lighting fixture lines.

Emergency lighting (lamps with "Exit" inscription, located along escape routes) should be connected similar to emergency lighting, through ALT, and through own UPS. Do not forget about the need for evacuation lighting in the assembly hall (inside).

Local lighting shall be provided according to the layout of the equipment of the TX in the reading room of the library, in the sewing shop, in the office of informatics.