Calculation and construction of reinforced concrete lintel
- Added: 19.10.2021
- Size: 491 KB
- Downloads: 0
Description
Walls are made of silicate brick h = 640mm, γ = 19kN/m2;
The floor is made of reinforced concrete slab PK, weight 1m2plate - 3kN/m2;
Jumpers are accepted as bar according to GOST 948-2016;
Length - 1940mm;
Width - 120 mm;
Height - 140 mm;
Concrete class B-20;
Class of working longitudinal reinforcement A-III;
Class of transverse reinforcement A-I;
PROJECT COMPOSITION
Graphic part
- Structure formwork diagram;
- Structure reinforcement scheme;
- Rebar frames (grids);
- Specification of reinforcement products;
- Steel Consumption Sheet.
CONTENTS OF THE EXPLANATORY NOTE
- Cover sheet;
- Task;
- Content (large die sheet);
- Design of reinforced concrete lintel:
1Assignment of concrete and reinforcement materials;
2 Load collection;
3 Determining the dimensions of the jumper;
4 Calculation of bridge strength by limit state;
4.1 Calculation of strength by normal sections ;
4.2 Calculation of strength by inclined sections ;
5 Calculation of the mounting loop;
- List of sources used.
Project's Content
Курсовая 12 тема (1) (1).docx
|
графическая часть 12 в.dwg
|
Additional information
Contents
1 Purpose of concrete and reinforcement materials;
2 Load collection;
3 Determining the dimensions of the jumper;
4 Calculation of bridge strength by limit state;
4.1 Calculation of strength by normal sections;
4.2 Calculation of strength by inclined sections;
5 Calculation of the mounting loop;
List of sources used
графическая часть 12 в.dwg
