AR 3 storey administrative building

The building is 3 storeys rectangular in plan with dimensions in axes of 15.0x24.0 m height room 3.0 m. The building was decided in a rigid structural scheme. Taking into account seismic impacts. Foundations - tape, monolithic railway/concrete concrete B-12.5. Directly below the foundation floor there is a concrete preparation of the strata. 100 mm. The walls of the building are made of burnt brick M-75 on the M-50 district, partitions on the M-50 district. Along the perimeter of the walls at el. - 0.03 horizontal waterproofing of cement-sand mortar is provided. 30 mm. Slabs - from prefabricated railway/concrete hollow slabs, frozen in the place of operation into an antiseismic belt, passing along the entire perimeter of the walls. The roof is attic, the insulation is expanded. 100 mm. The roofing was built on wooden rafters and a grate of 50x50 mm bars with a pitch of 350 mm. Windows - PVC, doors - individual MDF (Rasulov type) and Aluminum type "IMZO." Lintels in the walls monolithic railway/concrete concrete B-15, in partitions metal from angles with transverse reinforcement. Floors, depending on the purpose of the premises, are laminate, italogranite and made of ceramic tiles. A porch with ramps is provided in front of the main entrance. Concrete ramp B-25 (M-300) stratified. 30 mm with a device of transverse furrows with a depth of 10 mm with a width of 15 mm and a pitch of 250 mm. At each exit there are visors above the porches. Exterior decoration The basement of the entire building is finished with Italologranite tiles. Walls - Improved plaster and painting travertine. color according to the project. Finish the visors above the entrance from alupan and lexan. keramo granite on a stainless steel metal frame. Interior Interior Wall finish with high quality plaster followed by painting with water emulsion compositions. In wet rooms there are ceilings made of plastic, wall lining with tile tiles for the entire height of the walls. In the Rooms and the corridor, the ceilings are sewn from gypsum board, in staircases the concrete surfaces of the ceilings are provided to be rubbed with cement-sand mortar with subsequent painting with water-emulsion paints. Indoor floors - laminate, ceramic tiles and italogranite tiles.