Technological process "Cover" for a vacuum pump
- Added: 25.12.2021
- Size: 5 MB
- Downloads: 3
Description
Project's Content
1 лист.cdw
|
Пояснительная записка.docx
|
Prisposoblenie_tekhnologicheskoe__KP-2068999-24-03-02_002_025_00.spw
|
list_4.cdw
|
list_2.cdw
|
List_3.cdw
|
Additional information
Contents
Introduction
1. Analysis of source data
1.1 Description of production type
1.2 Analysis of service purpose of the article
1.2.1 Service purpose of worm gear box
1.2.2 Part Service Assignment
1.2.3 Analysis of part material
1.3 Part processability analysis
1.4 Technical Specifications Analysis
2. Process Design
2.1 Processing Plan
2.2 Processing diagram
2.3 Graph of linear dimensions
2.4 Tolerance and minimum allowance components
2.5 Calculation of linear process dimensions
2.6 Output
3. Process Operation Design
3.1 Calculation of cutting modes
3.2 Equipment selection
3.3 Definition of time standards
4. Process Appliance Design
4.1 Selection of accessory
4.2 Calculation of fixing force
List of sources used
Application Error! Bookmark is not defined
Summary
The course project on the topic "Technological process of manufacturing the part" Right Lid "on the subject of the basis of mechanical engineering technology is made on 30 pages, includes 7 tables, 8 drawings, 5 literary sources, specification. The graphic part of the project consists of 4 sheets:
Part - Right cover (A3 format)
Process operations (format A2)
Process adjustment (A2 format)
Technological adaptation (A1 format).
Introduction
This course design presents the development of the manufacturing and processing process of the part "Right Cover."
For development, the type of production was determined, the service purpose of the part was analyzed, the processability of the part design was analyzed, and the method of obtaining the part blank was chosen .
The machining process was designed, machines were selected, and a dimensional analysis was carried out. The drill operation then calculates the cutting modes, selects the drilling machine model, tool, and tool setup.
Conclusion
In this course design, the machining process was designed, machines were selected, and a dimensional analysis was carried out. Then the cutting modes were calculated for the drill operation, the drilling machine model, tool and tool setup were selected.
1 лист.cdw
Prisposoblenie_tekhnologicheskoe__KP-2068999-24-03-02_002_025_00.spw
list_4.cdw
list_2.cdw
List_3.cdw
Similar materials
- 24.01.2023
- 13.05.2023
- 13.05.2022
- 13.12.2022
- 24.01.2023
- 24.01.2023