Talrep model
- Added: 15.01.2015
- Size: 290 KB
- Downloads: 2
Find out how to download this material
Subscribe to receive an information about new materials:
Description
Device for tightening and selection of loose rigging, cables, etc. It usually consists of two screws with opposite threads, screwed into a special ring with two threaded holes. The ends of the screws are made with an eye or hook to which the cable is attached. The tension is controlled by the rotation of the ring, so that the screws are shifted to the center. Talreps are used in cases where a very high tensioning force is required and can vary in weight from several grams (for tensioning, for example, curtain strings - a tensioning force of several kilograms) to tens of tons - such devices are used in the construction of buildings and bridges.
Project's Content
|
|
кольцо.m3d
|
кольцо.m3d.bak
|
|
корпус.m3d
|
|
крюк.m3d
|
Талреп.a3d
|
|
Талреп.a3d.bak
|
Additional information
Drawings content
кольцо.m3d
корпус.m3d
крюк.m3d
Similar materials
Free downloading for today
Update after: 5 hours 42 minutes
