Oil drain bench
- Added: 01.06.2014
- Size: 656 KB
- Downloads: 2
- ВКонтакте
- РћРТвЂВВВВВВВВнокласснРСвЂВВВВВВВВРєРСвЂВВВВВВВВ
- Telegram
Subscribe to receive an information about new materials:
Description
Unit drawing for oil drain and its calculation, details, installation drawing.
Oil drain device represents carriage 5 installed on guide channel 4 on which lengthening rods 6 are hingedly fixed on end of which funnel 7 is located. Guide channel must be attached from above to metal rib of pit 2, and from the bottom to concrete by dowel nails. Screw 7 is connected by hose through quick-release clutch 8 to barrel 9 located on bogie 12. in the barrel there is an inspection glass 11 for oil level control. The pumping is due to the vacuum pump 10.
Oil drain device represents carriage 5 installed on guide channel 4 on which lengthening rods 6 are hingedly fixed on end of which funnel 7 is located. Guide channel must be attached from above to metal rib of pit 2, and from the bottom to concrete by dowel nails. Screw 7 is connected by hose through quick-release clutch 8 to barrel 9 located on bogie 12. in the barrel there is an inspection glass 11 for oil level control. The pumping is due to the vacuum pump 10.
Project's Content
|
|
1 А4.cdw
|
|
2 А4.cdw
|
|
3 А4.cdw
|
|
4 А3.cdw
|
|
5 А4.cdw
|
|
6 А4.cdw
|
|
7 А4.cdw
|
|
ДП УСМ Лист 1исправлено2.cdw
|
|
ДП УСМ Лист 2исправлено2.cdw
|
ДП УСМ Р3.doc
|
Спецификация1.spw
|
|
Спецификация2.spw
|
Additional information
Drawings content
1 А4.cdw
2 А4.cdw
3 А4.cdw
4 А3.cdw
5 А4.cdw
6 А4.cdw
7 А4.cdw
ДП УСМ Лист 1исправлено2.cdw
ДП УСМ Лист 2исправлено2.cdw
ДП УСМ Р3.doc
Спецификация1.spw
Спецификация2.spw
Similar materials
- 12.12.2023
Free downloading for today
Update after: 1 hour 2 minutes
