Monjus for acetone storage
- Added: 11.12.2021
- Size: 3 MB
- Downloads: 1
Description
Course work on engineering graphics for the first year of engineering specialties. Protection work at the mark "good."
Project's Content
Пояснительная записка Шуленин 280.docx
|
Курсовая.cdw
|
Additional information
Contents
Introduction
Analytical Overview
Sizing of apparatus components
Determination of shell wall thickness of housing s by apparatus diameter and pressure in it
Select Standardized Bottom Design Option
Structural parameters of steel welded flanges
Steel pipe parameters for nozzles
Parameters of flat non-metallic gaskets for flange connections of pipes
Nozzle lengths
Lower supports (struts) of vertical devices
Calculation of the total weight of the apparatus
Calculation of cylindrical shell weight
Calculation of bottom weight
Calculation of the weight of the support (strut) of the Monjus vertical
Calculation of mass of Monjus vertical transfer pipe
Weight of connectors
Manhole weight
Calculation of nominal volume of the set
Conclusion
List of literature used
Introduction
The purpose of my design work is to develop a chemical apparatus: a vertical monjus for storing acetone.
Using methodological guidelines and initial data (Materials of articles, shell diameter, wall thickness, etc.) I have to:
build a process task in the program "Compass 3D 16.1" of this device, specify dimensions, perform all additional constructions (Views), calculate the initial mass of the inactive (empty) device and make an explanatory note, which will indicate all the data used by me and the algorithm of my actions.
Analytical Overview
Monjus are designed for lifting and displacement under pressure of air of pre-accumulated liquid in them. The nozzle is filled through the connector up to the specified elevation, after which the connector is shut off, and gas is sent to the connector under pressure. Thus, highly aggressive liquids are moved without the use of pumps. The connector on the upper bottom serves for liquid discharge from the apparatus. Monjus are repaired after careful preparation, ensuring complete safety of the work. To inspect the devices and perform repair work, the monsters are equipped with hatches. The walls of the housing and the necks of the connectors and hatches are subject to wear. They are repaired depending on the degree of wear according to the technology described earlier for cylindrical vertical devices. If necessary, the necks of the connectors and hatches are cut out and replaced with new ones. During repairs, the protective anticorrosion coating shall be thoroughly inspected; areas with damaged coating are restored after appropriate cleaning as it was carried out at the manufacturing plant or installation site .
Conclusion
1.In accordance with the terms of reference developed
technical design of vertical monjus.
2. The drawing (A1 format) of the general view of the vertical monus for acetone storage is executed.
3. As part of the technical project, the calculation of the full
weight of the apparatus, which is:
Map = 556 kg
4. Full volume of horizontal heat exchanger
makes the following value:
Vta = 1.25 m3
Курсовая.cdw
Similar materials
- 23.11.2022
- 04.04.2021