Device for monitoring of residual deformations of elastic locking ring
- Added: 05.06.2014
- Size: 64 KB
- Downloads: 0
Find out how to download this material
Subscribe to receive an information about new materials:
Description
General view and BOM.
The control device is designed to monitor residual deformations of the elastic locking ring. To do this, a ring (for example, 37 mm diameter) is put on a large diameter mandrel (about 42 mm) after removing the ring from the mandrel, the absence of residual deformations is checked.
The disc with the ring is inserted into the plate pos. 12. When the lever is lowered, pos. 2 lower conical end of mandrel pos. 3 enters the test ring and breeds it to a size of 42 mm. When lifting the lever, pos. 2 the ring rests against the bracket, pos. 5 and slips off the mandrel. In upper position rod (4) is fixed by ball (pos. 14, which is pressed into the rod recess by spring pos. 13.
The control device is designed to monitor residual deformations of the elastic locking ring. To do this, a ring (for example, 37 mm diameter) is put on a large diameter mandrel (about 42 mm) after removing the ring from the mandrel, the absence of residual deformations is checked.
The disc with the ring is inserted into the plate pos. 12. When the lever is lowered, pos. 2 lower conical end of mandrel pos. 3 enters the test ring and breeds it to a size of 42 mm. When lifting the lever, pos. 2 the ring rests against the bracket, pos. 5 and slips off the mandrel. In upper position rod (4) is fixed by ball (pos. 14, which is pressed into the rod recess by spring pos. 13.
Project's Content
|
|
Прибор контрольный.cdw
|
|
Спецификация 2 лист.cdw
|
|
Спецификация.cdw
|
Текстовый документ.txt
|
Additional information
Drawings content
Прибор контрольный.cdw
Спецификация 2 лист.cdw
Спецификация.cdw
Similar materials
Free downloading for today
Update after: 15 hours 14 minutes
