Development of integrated ATO for 350 MAZ-651705 vehicles and detailed development of fuel compartment

Contents

Contents

General part

Technological calculation of the company under development

2.1 Initial data for calculation

2.2 Calculation of Annual Production Program

2.3 Calculation of annual scope of work

3 Engineering of production units

3.1 Process in Division

3.2 Calculation of maintenance posts

3.3 Calculation of the number of waiting places

3.4 Calculation of production areas

3.5 Calculation of storage areas

3.6 Calculation of areas of public premises

3.7 Selection of process equipment

3.8 Calculation of equipment area

3.9 Subdivision Planning

4. Organization of production

4.1. Organization of enterprise management

4.2.Distribution of workers by specialties, qualifications, workplaces

4.3.Compounding of Job Instruction

Introduction

The task of road transport is to meet the need for transportation within the specified time frame and in the required amount. To solve it, it requires vehicles of a certain type and a production base that provides their storage, maintenance and repair.

Course design is an important stage of the subject "Technical operation of cars" and has the following goals and objectives:

consolidation, improvement and replenishment of knowledge and skills gained in the process of training, in the organization of production, technology of maintenance and repair of cars, design of production zones and sections;

increasing knowledge of scientific organization of labor and design of motor transport enterprises;

Training in best production practices and skills in diagnosis, maintenance and maintenance of vehicles;

selection and analysis of materials of technological and design nature necessary for the performance of the diploma project;

developing the ability to analyze and logically justify engineering decisions.

Implementation of the project develops ability to independently solve technological and design problems, ability to use standards, standards, reference and other special books.

Technological calculation of the designed enterprise

2.1 Initial data for calculation:

Input data is accepted in accordance with the assignment for course design.

Source Data:

The name of the designed object is the fuel compartment.

Car model - MAZ-651705

Number of cars - 350

Operating conditions:

pavement - pounding stone

condition of movement - outside the city

terrain type - hilly

Climatic conditions - moderately warm

The average daily mileage of the car is 152 km.

Mileage from the beginning of operation - 160... 200 thousand km.

Manufacturing Department Design

3.1 Process in Division

When performing projects for maintenance, TR, diagnostics zones, it is necessary to show the movement of vehicles in the production area and work stations from the moment of its arrival outside the ATO until the moment of entry into the line, taking into account the specific conditions of the existing ATO, as well as the connection of diagnostics with maintenance and repair.

When designing any compartment, it is necessary to describe the process using the example of repair of any unit or unit, test of the unit or manufacture of a part, starting from washing and ending with storage or installation on a rack. The process should provide for conditions that exclude excessive movement and walking, rapid fatigue and wasteful working time. At the same time, the explanatory note should refer to the equipment positions on the layout.

After describing the process in this compartment, it is necessary to give a diagram.