Design of MAZ 5335 truck undercarriage repair area for 100 units "

Contents

2. Job for Course Project

3. Project Objective and Objectives

4. Calculation of the production program of the enterprise

5. Labor costs and annual scope of work

6. Operating mode of the enterprise, annual funds of time of workers and equipment

7. Routing and operational description of works performed in the production area in the form of a roadmap

8. Calculation of number of workers, quantity of process and handling equipment

9. To Define a Parcel Area

10. Site Planning Development

11. Definition of fire and explosion hazard category of the site

12. Production Building Layout Development

13. Project business case

List of literature

Project Goals and Objectives

Deepening knowledge on scientific organization of labor and design of motor transport enterprises. Learn advanced manufacturing techniques and gain skills in diagnosis, maintenance, and maintenance of vehicles. Selection and analysis of materials of technological and design nature required for the project execution. Centralization of car repair works; Improvement of service quality of units and assemblies; Reduction of labor costs; Reduction of material resources consumption; Increasing productivity; Maximum mechanization of the production process. Rational combination and use of all production resources in order to perform maximum transport work in the transportation of goods and better service to the population by passenger transportation. Rational arrangement of stands, technical equipment and equipment for maintenance works. Efficient use of the company's fixed assets and primarily rolling stock. Improved planning of motor transport enterprises (identification of the most effective planning indicators, improved planning of vehicle loading. In the area of economic and financial activities, it is necessary: to carry out daily work to save material and labor resources, eliminate unproductive costs and eliminate losses in production; strictly observe financial discipline.

Site Planning Development

The layout of the machining area will be developed according to recommendations [1], [2].

Planning is done at scale 1:200. on the layout we shall indicate all technological equipment: machines, workpieces, control tables, lifting and transport equipment and means of interoperative transportation of blanks, places of workers at the machines.

In the construction part, we indicate: columns with axes, roads, walls and partitions.

Production Building Layout Development

In general, the production building is equipped with everything necessary and has an optimal arrangement of both premises and equipment and posts for their best use, allowing production to show the highest quality indicators for servicing rolling stock. All sections have an open gate, allowing you to freely leave or move to the line or to another section, respectively.