Course "Technology of overhaul of the turning-carousel machine model 1512"

Added: 21.04.2017
Size: 795 KB
Downloads: 3

Find out how to download this material

Telegram bot for searching materials

Drawings purchasing

Subscribe to receive an information about new materials:

t.me/alldrawings

vk.com/alldrawings

Description

The project of overhaul of the turning-carousel machine 1512 and the technological process of restoring the part "Lever," a drawing of the kinematic diagram of the machine, lever has been developed. The whole project was made in Compass.

Project's Content

kap.rem._1512.rar [ 795 KB ]

Кап.рем._1512

getblob.asp [ 601 KB ]

карта.frw [ 53 KB

]

карта1.frw [ 56 KB

]

Кинематика.cdw [ 187 KB

]

лист.frw [ 26 KB

]

маршрут.frw [ 100 KB

]

ОК.frw [ 41 KB

]

Опись.frw [ 47 KB

]

Пояснительная записка

1.1 Назначение кап. рем..frw [ 48 KB

]

1.2Описание оборуд.frw [ 51 KB

]

1.2Описание оборуд2.frw [ 52 KB

]

1.3 Подготовка оборудов..frw [ 43 KB

]

2.1 Технол. процесс.frw [ 50 KB

]

2.2Описание вост дет.frw [ 67 KB

]

2.3Обоснование вост дет.frw [ 50 KB

]

2.4Техпроцесс восстанов дет.frw [ 45 KB

]

2.5Расчёт или подбор режимов.frw [ 46 KB

]

2.5Расчёт или подбор режимов2.frw [ 38 KB

]

2.6.2Подбор.frw [ 41 KB

]

2.6.2Подбор2.frw [ 41 KB

]

2.6Расчёт или подбор.frw [ 43 KB

]

2.6Расчёт или подбор2.frw [ 43 KB

]

2.7Описание КН.frw [ 65 KB

]

2.8Расчёт сварного шва.frw [ 42 KB

]

библиография.frw [ 35 KB

]

Введение.doc [ 27 KB

]

Введение.frw [ 48 KB

]

КАРТА ЭСКИЗА.frw [ 45 KB

]

карта.frw [ 67 KB

]

карта1.frw [ 78 KB

]

Маршрутная карта ремонта1.frw [ 51 KB

]

Маршрутная карта ремонта2.frw [ 47 KB

]

Маршрутная карта ремонта3.frw [ 46 KB

]

ОК1.frw [ 67 KB

]

ОК2.frw [ 65 KB

]

Опись.frw [ 48 KB

]

Содержание.frw [ 42 KB

]

Титул КП.frw [ 29 KB

]

Титул КТД.frw [ 33 KB

]

Титул ПЗ.frw [ 29 KB

]

Титул ТП.frw [ 30 KB

]

Фрагмент.frw [ 36 KB

]

Фрагмент1.frw [ 40 KB

]

Чертеж.cdw [ 39 KB

]

Чертеж1.cdw [ 63 KB

]

Additional information

Introduction

Labor productivity in mechanical engineering is directly dependent on the technical condition of working equipment and mechanisms, their uninterrupted and accurate.

Therefore, in order to achieve a high rate of productivity growth, work is being carried out in machine building in a broad plan to improve the organization of repair of industrial equipment, and work on the introduction of progressive technology for repair work into repair practice.

Modern technological equipment is a complex complex of mechanisms and apparatus. There is an increasing number of flow lines and automatic lines in the industry for successful operation, which require the failure-free operation of each and its incoming unit.

The role of mechanics serving modern equipment is extremely responsible, requires a good knowledge of the equipment and the ability to skillfully repair the machines.

To meet these high requirements, the locksmith must master the basics of equipment repair technology, receive good general technical training and have a good level of knowledge

The main tasks of repairmen of the repair service are ensuring uninterrupted operation and good technical condition of the equipment.

The responsibility of the mechanic is to monitor strict compliance with the rules for the technical operation of industrial working equipment.

Repairs shall be carried out on the basis of progressive technology and the use of tools that increase labor productivity and ensure high quality of production repairs.

Drawings content

карта.frw