RU
Waiting For Moderation: 0

Menu

Drawings Drawings content Pictures

Total: 74767

Casting and stamping

Casting and stamping

Added: 04.11.2022
Size: 385 KB
Downloads: 0

telegram_icon

Telegram bot for searching materials

Subscribe to receive an information about new materials:

telegram_icon

https://t.me/alldrawings

vk_icon

https://vk.com/alldrawings

Description

Casting and stamping of parts - flange, lid, housing

Project's Content

Чертеж1.dwg [ 385 KB

]

The material is a file that can be opened in program:

AutoCAD or DWG TrueView

About file formats and types of materials

Similar materials

Calculation of the casting system and the supply of the casting lever when casting in coquilles

25.01.2023

Calculation of the casting system and the supply of the casting lever when casting in coquilles

To develop a set of molding equipment for the manufacture of a casting clutch when casting in sand and clay wet molds in the amount of 100 pcs. Casting of material MF20

25.01.2023

To develop a set of molding equipment for the manufacture of a casting clutch when casting in sand and clay wet molds in the amount of 100 pcs. Casting of material MF20

Comparison of blanks obtained by casting and stamping

24.01.2023

Comparison of blanks obtained by casting and stamping

The project of the non-ferrous casting shop with a capacity of 2000 tons / year according to the nomenclature of JSC Gomel Casting and Normals Plant

24.01.2023

The project of the non-ferrous casting shop with a capacity of 2000 tons / year according to the nomenclature of JSC Gomel Casting and Normals Plant

Development of the technological process of casting Housing and design of the mix preparation workshop of the gray cast iron casting shop with a capacity of 18000 tons / year

25.01.2023

Development of the technological process of casting Housing and design of the mix preparation workshop of the gray cast iron casting shop with a capacity of 18000 tons / year

Development of the technological process of obtaining casting Upper disc XM 09.22.300A by a special casting method

25.01.2023

Development of the technological process of obtaining casting Upper disc XM 09.22.300A by a special casting method

Calculation and design of technological process and stamping equipment for the manufacture of parts from sheet material - SSAU

25.01.2023

Calculation and design of technological process and stamping equipment for the manufacture of parts from sheet material - SSAU

Plan of forging and stamping shop

28.04.2020

Plan of forging and stamping shop

Free downloading for today

Update after: 9 hours 33 minutes

Passenger sleeping reserved seat car

17.08.2014

Passenger sleeping reserved seat car

Typical project 5.407-117 Installation of boxes with choppers and fuses. Issue 0

23.08.2014

Typical project 5.407-117 Installation of boxes with choppers and fuses. Issue 0

Stamp drawings for cutting and punching

11.08.2012

Stamp drawings for cutting and punching

Matrix Sheet

24.06.2021

Other materials

Improvement of the clinic according to technical standards

24.10.2015

Improvement of the clinic according to technical standards

Two-storey social housing

24.10.2015

Two-storey social housing

ElectriCS 3D User Guide (Test Cases)

25.01.2023

ElectriCS 3D User Guide (Test Cases)

Bulldozer DZ 35

01.09.2011

Bulldozer DZ 35

Up