Calculation of landings and calibers
- Added: 27.09.2015
- Size: 639 KB
- Downloads: 1
Description
The purpose of the project is to calculate the tolerances and fits of the mentioned fillets, calculate the size chain, determine the executive dimensions of the key, splined and threaded calibers. The mechanism specified in this heading design is a single-stage gearbox for general purpose, transmitting the load N = 3.9 kW with a rotation speed of n = 990 rpm. The reduction gear includes six rolling bearings, two of which are thrust; two splined shafts; shaft-gear; key connection; three threaded joints. Rotation from the drive shaft is transmitted by means of a gear train in which the drive wheel is fitted to the shaft by means of a key joint. The driven gear can turn on and off the gear, this is provided by splined connection of the wheel with the shaft. Gear, Shaft, prism gauge, plug gauge, threaded gauge, thread profile with tolerances
Project's Content
|
1-Зубчатое колесо.cdw
|
2-Вал.cdw
|
3-Калибр призма.cdw
|
4-Калибр пробка(шпоночный).cdw
|
5-Калибр пробка.cdw
|
6-Калибр кольцо.cdw
|
7-Резьбовые Калибры.cdw
|
8-Профиль резьбы.cdw
|
МСС.doc
|
СП1.spw
|
СП2.bak.spw
|
СП3.bak.spw
|
СП4.bak.spw
|
Additional information
Contents
Contents
Introduction
Calculation of tolerances and fits of rolling bearings
Calculation of dimension chain
Calculation of tolerances and fits of the assigned key coupling
Calculation of actuating dimensions of key gauges
Calculation of tolerances and fits of the specified splined joint
Calculation of actuating dimensions of splined calibers
Calculation of tolerances and fits of the specified threaded connection
Calculation of actuating dimensions of threaded calibers
Gauge marking
List of literature
Introduction
The performance of mechanisms and machines (durability, reliability, accuracy, etc.) depends to a large extent on the correct selection of fits, tolerances of shape and location, surface roughness. In an assembled product, parts are connected to each other, and deviations in the dimensions, shape, and arrangement of axes or surfaces of one of the parts cause deviations in other parts. These deviations, summing up, affect the performance of machines and mechanisms.
To define feature control frame tolerances, you have chosen to calculate the maximum, minimum, as the most versatile and visible. It is based on the assumption of the most unfavorable combination of deviations in parts in the product .
The mechanism specified in this heading design is a single-stage gearbox for general purpose, transmitting the load N = 3.9 kW with a rotation speed of n = 990 rpm. The reduction gear includes six rolling bearings, two of which are thrust; two splined shafts; valshesternya; key connection; three threaded joints. Rotation from the drive shaft is transmitted by means of a gear train in which the drive wheel is fitted to the shaft by means of a key joint. The driven gear can turn on and off the gear, this is provided by splined connection of the wheel with the shaft.
We are invited to calculate the tolerances and fits of the mentioned joints, calculate the size chain, determine the executive dimensions of the key, splined and threaded calibers .
1-Зубчатое колесо.cdw
2-Вал.cdw
3-Калибр призма.cdw
4-Калибр пробка(шпоночный).cdw
5-Калибр пробка.cdw
6-Калибр кольцо.cdw
7-Резьбовые Калибры.cdw
8-Профиль резьбы.cdw
СП1.spw
СП2.bak.spw
СП3.bak.spw
СП4.bak.spw
Similar materials
- 15.05.2014