Buffer for preventing breakage of parts during their processing on metal cutting stan�
- Added: 03.05.2021
- Size: 3 MB
- Downloads: 0
Description
The buffer is used in automatic lines to prevent breakage of parts during their processing on metal cutting machines.
The part supplied to the conveyor is installed in the axial direction under the pressure of the pusher, which brings the part to the buffer pos. 9 Upon impact, buffer rests against spring (4), which, when compressed, absorbs impact. The runners in pos.6 transfer the part to the next automatic line operation .
Project's Content
|
|
Болт M12х32.58 ГОСТ 7798-70.m3d
|
|
Болт M6х28.58 ГОСТ 7798-70.m3d
|
|
Гайка M30 ГОСТ 5915-70.m3d
|
|
Картон А 1 ГОСТ 66-59-83.m3d
|
|
Кольцо СГ 71-54-5 ГОСТ 641881.m3d
|
|
Кольцо СГ 79-59-5 ГОСТ 641881.m3d
|
МЧ00.27.00.00 Буфер.a3d
|
|
МЧ00.27.00.01 Корпус.m3d
|
|
МЧ00.27.00.02 Стакан.m3d
|
|
МЧ00.27.00.03 Гайка упорная.m3d
|
|
МЧ00.27.00.04 Пружина.m3d
|
|
МЧ00.27.00.05 Тарелка.m3d
|
|
МЧ00.27.00.06 Бегунок.m3d
|
|
МЧ00.27.00.07 Втулка.m3d
|
|
МЧ00.27.00.08 Крышка.m3d
|
|
МЧ00.27.00.09 Буфер.m3d
|
|
МЧ00.27.00.10 Ось.m3d
|
|
Подшипник 208 ГОСТ 8338-75.m3d
|
|
Шайба 12-100 HV ГОСТ 28848-90.m3d
|
Additional information
Болт M12х32.58 ГОСТ 7798-70.m3d
Болт M6х28.58 ГОСТ 7798-70.m3d
Гайка M30 ГОСТ 5915-70.m3d
Картон А 1 ГОСТ 66-59-83.m3d
Кольцо СГ 71-54-5 ГОСТ 641881.m3d
Кольцо СГ 79-59-5 ГОСТ 641881.m3d
МЧ00.27.00.01 Корпус.m3d
МЧ00.27.00.02 Стакан.m3d
МЧ00.27.00.03 Гайка упорная.m3d
МЧ00.27.00.04 Пружина.m3d
МЧ00.27.00.05 Тарелка.m3d
МЧ00.27.00.06 Бегунок.m3d
МЧ00.27.00.07 Втулка.m3d
МЧ00.27.00.08 Крышка.m3d
МЧ00.27.00.09 Буфер.m3d
МЧ00.27.00.10 Ось.m3d
Подшипник 208 ГОСТ 8338-75.m3d
Шайба 12-100 HV ГОСТ 28848-90.m3d
