Assembly drawing of cylindrical two-stage reduction gear box
- Added: 21.05.2015
- Size: 76 KB
- Downloads: 1
Find out how to download this material
Subscribe to receive an information about new materials:
Description
Technical characteristics of the gearbox:
1. Input shaft speed n inx = 1432 1/min
2. Gear ratio of gearbox U ed = 34.1
3. Output shaft speed n out = 42 1/min
4. Output shaft torque T out = 1140 N * m
5. Efficiency factor = 0.91
Technical requirements:
1. Degree of gear accuracy as per GOST 1643-81
2. Cover the connector plane with thin layer of UT-34 sealing compound, GOST 24285-80 during final assembly.
3. Pour 3.4 l of I-G-A-32 oil into the reduction gear box (GOST 20799-88)
4. Radial cantilever load on the shaft is not more than:
input - Fc = 830 N
output - Fq = 8500 N
1. Input shaft speed n inx = 1432 1/min
2. Gear ratio of gearbox U ed = 34.1
3. Output shaft speed n out = 42 1/min
4. Output shaft torque T out = 1140 N * m
5. Efficiency factor = 0.91
Technical requirements:
1. Degree of gear accuracy as per GOST 1643-81
2. Cover the connector plane with thin layer of UT-34 sealing compound, GOST 24285-80 during final assembly.
3. Pour 3.4 l of I-G-A-32 oil into the reduction gear box (GOST 20799-88)
4. Radial cantilever load on the shaft is not more than:
input - Fc = 830 N
output - Fq = 8500 N
Project's Content
|
Лист2.cdw
|
|
Лист1.cdw
|
Additional information
Drawings content
Лист2.cdw
Лист1.cdw
Similar materials
Free downloading for today
Update after: 21 hours 47 minutes
