Accessory for receiver manufacturing + process + workshop

Receivers are made on modern machine equipment of domestic and foreign manufacturers. The process of manufacturing air receivers begins with the cutting of shell parts from sheet steel at the laser cutting plant of the Swiss company Bystronic. Then the shell is rolled on Swedish RONDO machines. The diameter range of the shell is from 219 to 800 mm. Elliptical flanged bottoms, which are most widely used in the manufacture of air receivers due to their rational shape and reliability in operation, are manufactured by stamping or by rolling on a forming machine of the Spanish company TENN. Welding of longitudinal and annular seams of air receivers is carried out on automatic welding machines. Welding of longitudinal and annular seams of air receivers is carried out on automatic welding machines manufactured on an individual order for OJSC Bezhetsky Plant "Autospetsequipment," equipped with equipment of the Italian company "Miller." Each air receiver undergoes a complete set of mandatory tests and quality control during production, which guarantees safety during operation. Longitudinal and annular welded joints of the receiver are subjected to ultrasonic inspection to detect internal defects in them. Each air receiver shall be subjected to a hydraulic strength test; pneumatic leak test. The company operates two powder paint lines of receivers. After testing, air receivers enter the shot blast chamber to prepare the surface for painting. The company operates two lines of powder painting of receivers. Powder painting provides high strength characteristics and chemical resistance of the paint coating, and aesthetic requirements for this type of product.