Valve MCh00.56.00.00 SB

Valve MCh00.56.00.00 SB

The scope of work includes: Valve (SB), Detailing (body, cover, flange, handwheel, valve, bushing, screw, cap, tee, spring, valve, seat, plug, gasket, gasket, gasket, gasket), Specification, 3D assembly, 3D of all parts.

The valve is designed to change the flow rate of liquid or steam passing through the pipeline. When you rotate the handwheel (pos. 4) to the left, the screw (pos. 7) will rise and the valve (pos. 5) will open the seat opening (pos. 12). At the same time, the liquid or vapor will begin to pass from the lower horizontal pipe to the upper one. To prevent leakage, a gland seal (pos. 20) is provided between the cover (pos. 2) and the screw, which is clamped by a flange (pos. 3). Gaskets are provided to maintain tightness (pos. 14, 15, 16). A safety valve is installed on the tee (pos. 9), which serves to release liquid or steam at overpressure. When the pressure increases, the valve (pos. 11) rises, compressing the spring (pos. 10). At the same time, the excess liquid or vapor escapes through the gap into the side opening of the bell (pos. 8).