Valve - Bogolyubov - MH00.62.00.00
- Added: 23.02.2022
- Size: 2 MB
- Downloads: 2
Description
MH00.62.00.00 Valve
From the album by S.K. Bogolyubov "Reading and drawing assembly drawings"
Album Publishing House "Mashinostroenie" Moscow 1986
Composition: 3D assembly, 3D models of all parts, drawings
Software: Compass-3D
Description:
The valve is used to change the pressure and velocity of the liquid through the pipeline.
When rotating the flywheel poses. 4 screw pos. 9 with posture valve. 7 rises up, passing the right amount of liquid. Inside the case pose. 1 pressed saddle pos. 8 valve pos. 7. The conical end of the valve is pressed tightly against the conical surface of the seat. In the drawing, the valve is shown closed, the liquid does not pass through the valve. Sleeve poses. 3 fixed in the posture posture. 2 screw pos. 11. The valve is connected to the screw pos. 9 two pins poses. 13. To prevent leakage of liquid through the gaps between the body and the parts of the poses. Sealing is provided 5, 6, 9. It consists of a washer pos. 6 and asbestos cord pos. 14, which are tightened by the clamping nut of the poses. 5.
Option No. 62 from the album by S.K. Bogolyubov "Reading and detalizing assembly drawings. Valve detalization.
Project's Content
МЧ00.62.00.06 _ Шайба.cdw
|
|
МЧ00.62.00.04 _ Маховичок.cdw
|
|
МЧ00.62.00.09 _ Винт.cdw
|
|
МЧ00.62.00.07 _ Клапан.cdw
|
|
МЧ00.62.00.00 СБ _ Клапан Сборочный чертеж.cdw
|
МЧ00.62.00.05_Гайка.m3d
|
Спецификация.spw
|
|
МЧ00.62.00.02_Стойка — акс.m3d
|
|
МЧ00.62.00.01_Корпус — акс.m3d
|
|
МЧ00.62.00.06_Шайба.m3d
|
МЧ00.62.00.00 СБ_Клапан.a3d
|
|
МЧ00.62.00.08 _ Седло.cdw
|
|
МЧ00.62.00.04_Маховичок.m3d
|
|
МЧ00.62.00.09_Винт.m3d
|
|
МЧ00.62.00.03 _ Втулка.cdw
|
|
МЧ00.62.00.05 _ Гайка.cdw
|
МЧ00.62.00.00 СБ_Клапан.jpg
|
|
МЧ00.62.00.02_Стойка.m3d
|
|
МЧ00.62.00.03_Втулка.m3d
|
|
МЧ00.62.00.02 _ Стойка.cdw
|
|
МЧ00.62.00.07_Клапан.m3d
|
|
МЧ00.62.00.01 _ Корпус.cdw
|
|
МЧ00.62.00.01_Корпус.m3d
|
|
МЧ00.62.00.08_Седло.m3d
|
Additional information
МЧ00.62.00.06 _ Шайба.cdw
МЧ00.62.00.04 _ Маховичок.cdw
МЧ00.62.00.09 _ Винт.cdw
МЧ00.62.00.07 _ Клапан.cdw
МЧ00.62.00.00 СБ _ Клапан Сборочный чертеж.cdw
МЧ00.62.00.05_Гайка.m3d
Спецификация.spw
МЧ00.62.00.02_Стойка — акс.m3d
МЧ00.62.00.01_Корпус — акс.m3d
МЧ00.62.00.06_Шайба.m3d
МЧ00.62.00.08 _ Седло.cdw
МЧ00.62.00.04_Маховичок.m3d
МЧ00.62.00.09_Винт.m3d
МЧ00.62.00.03 _ Втулка.cdw
МЧ00.62.00.05 _ Гайка.cdw
МЧ00.62.00.02_Стойка.m3d
МЧ00.62.00.03_Втулка.m3d
МЧ00.62.00.02 _ Стойка.cdw
МЧ00.62.00.07_Клапан.m3d
МЧ00.62.00.01 _ Корпус.cdw
МЧ00.62.00.01_Корпус.m3d
МЧ00.62.00.08_Седло.m3d
