Steel frame of single span building
- Added: 15.02.2015
- Size: 2 MB
- Downloads: 0
Description
Source Data:
Construction area: Kostroma
Snow district: IV.
Wind district: I.
Frame span: L = 24 m.
Elevation of the bottom of the girder: 13 m
Type of roof: warm without runs, slope 1.5%.
Project's Content
|
|
Записка металлы.doc
|
чертеж готов испр.dwg
|
Additional information
Structural development of the steel frame of the production building
General source data:
The building is one-story, one-span. The material of the main load-bearing structures is low-carbon steel of conventional strength with a design strength of 215-275 MPa. Type of roof - warm roof without runs with a slope of 1.5% (parallel shape of the truss). Take longitudinal pitch of columns equal to B = 6 m.
The length of the building in axes shall be taken equal to four-fold span L1 = 96 m. Bearing structures of the coating are rafters without a canopy. Supporting trusses on columns is hinged. Columns have rigid mating with foundation.
Frame Structural Frame Layout
Source Data:
Construction area: Kostroma
Snow district: IV.
Wind district: I.
Frame span: L = 24 m.
Elevation of the bottom of the girder: 13 m
Type of roof: warm without runs, slope 1.5%.
чертеж готов испр.dwg
Similar materials
- 24.04.2014
- 24.04.2014
- 24.01.2023