Calculation of multi-storey industrial building
- Added: 25.11.2018
- Size: 2 MB
- Downloads: 4
Description
Calculation of multi-storey industrial building. Calculation of slabs, columns, girder and foundation. Attached project drawings
Project's Content
|
А1 (КУЗНЕЦОВ) ЖБК.dwg
|
ЖБК (КУЗНЕЦОВ).docx
|
Additional information
Contents
Contents
Section 1. Building Design Layout
Section 2. Calculation and Design of a Prefabricated Slab
Section 2.1. Design span, loads and internal forces
Section 2.2. Strength and deformation characteristics of the material
Section 2.3. Slab cross-section and longitudinal section
Section 2.4. Calculation of plate strength by section normal at longitudinal axis
Section 2.5. Calculation of slab shelf for local bend
Section 2.6. Calculation of slab strength by concrete compressed strip between inclined cracks
Section 2.7. Calculation of plate strength by cross section inclined to longitudinal axis on action of transverse force
Section 2.8. Determination of the given geometric characteristics of the cross section of the plate
Section 2.9. Determination of pre-stress losses of valves
Section 2.10. Calculation of normal crack formation to longitudinal axis
Section 2.11. Calculation of crack opening normal to longitudinal axis
Section 2.12. Calculation of plate deflections
Section 3. To Calculate and Design a Non-Cut Slab Girdle
Section 3.1. Design span. Load collection and determination of internal forces
Section 3.2. Strength and deformation characteristics of concrete and reinforcement
Section 3.3. Calculation of strength of extreme and middle span girders by normal sections
Section 3.4. Calculation of rigel strength on concrete compressed strip between inclined cracks
Section 3.5. Calculation of strength of girders on cross section inclined to longitudinal axis on action of transverse force
Section 3.6. Joint of crossbar with column
Section 3.7. To Create a Material Symbol
Section 4. Column Calculation and Design
Section 4.1. Definition of longitudinal forces and design loads
Section 4.2. Strength and deformation characteristics of concrete and reinforcement
Section 4.3. Calculation of column strength by normal section
Section 4.4. Calculation for local compression of the support of the crossbar on the console
columns
Section 4.5. Strength calculation of the column support short console
Section 4.6. First Floor Column Joint Design
Section 5. Calculation and design of a monolithic beam slab
Section 5.1. Slab Design Layout
Section 5.2. Collection of loads on the plate and determination of internal forces
Section 5.3. Strength and deformation characteristics
Section 5.4. Calculation of monolithic plate of beam type for strength by normal sections
Section 5.5. Calculation of monolithic plate of beam type for strength by inclined sections
А1 (КУЗНЕЦОВ) ЖБК.dwg
Similar materials
- 26.09.2022
- 26.04.2019
- 24.01.2023
- 24.01.2023
- 24.01.2023