Hive with store extension

Hive hulls. Working drawings. WORKING DRAWINGS OF HOUSINGS WITH HEIGHT H = 320 MM FOR DIFFERENT TYPES OF HIVES. Hive housing with H = 320 mm (assembly drawing). 1 shows the front and rear walls of the housing; 2 is a side wall of the housing; 3 - fastening nails or self-cutting screws in wood. B is the width of the housing (overall size); B1 - width of the internal opening of the housing; B2 - external mounting size of the body folding; B3 - internal mounting size of the body folding. Serial number Number of frames in housing B, mm B1, mm B2, mm B3, mm 1 10 445 375 419 425 2 12 520 450 494 400 3 14 595 525 569 575 4 16 685 615 659 665 5 20 880 810 854 860 MAGAZINE EXTENSION Magazine extension (assembly drawing). 1 - front and rear walls of the magazine extension; 2 is the side wall of the magazine extension; 3 - fastening nails or self-cutting screws in wood. B is the width of the magazine extension (overall size); B1 - width of the internal opening of the magazine extension; B2 is the size of the external mounting size of the magazine extension false; B3 is the size of the internal mounting size of the magazine extension folding. Roof trim for typical hives. The roof trim is one of the components of modern hives, located between the body (or magazine extension) and the roof of the hive. The undercut is designed to accommodate elements for insulation of hives and feeders when feeding bees. Accordingly, the height of the underwing - H, is determined by the thickness of the insulation, which depends on the climatic conditions where the bees are kept. As a rule, the height of the roof trim is H = 80-140 mm. Many beekeepers, as a roofer, use a store extension, with the necessary changes in it. The choice remains with the beekeeper. NOTES: In the side walls, it is allowed to open, instead of a single vent, three holes with a diameter of 25 mm, uniformly located on the same axis in the size of 125 mm. The roof trim shall be assembled in accordance with the requirements of GOST 20740-75 "Hives. Specifications "; The options for the angular connection of the walls are carried out by the beekeeper-manufacturer, taking into account the recommendations given in the section: "Angular connections of the walls in the shell." It is necessary to make the necessary changes in dimensions. When using walls with a thickness of 20 mm in the undercuts, it is necessary to make appropriate changes in the dimensions of the joints, connections, mating parts of the magazine extension, using PVA glue. The assemblies of the roof cover walls, on the inside, on the ventilation holes are installed metal protective nets with a cell size of 2-3 mm.