Engineering and Equipment Calculation coursework

Contents

Task

Introduction

1. Apparatus design and selection of structural materials

2. Strength calculation of the main elements of the apparatus

3. Calculation of hole reinforcement

4. Selection of basic parameters and calculation of flange connection bolts

5. Selection and calculation of supports

Conclusion

Literature

Task

Calculate and check for strength the main elements of the apparatus with a stirring device (shells, bottoms, flange joints, supports).

Variant P13 M3

Working volume of V set () - 8.0

Dimensions, mm:

D = 1600

d1 =50

d2 = 50

d3 = 400

d4 = 60

d5 = 100

d6 = 60

Drive weight - 160 kg

Environment in set:

In the reactor vessel: KMnO4 - 6%, H2O

In a shirt - water

Temperature:

In the reactor vessel - 180 ° С

In a shirt - 30 ° С

Absolute pressure:

In the reactor vessel - 0.08 MPa

In the shirt - 0.4 MPa

Location of supports - on the jacket wall

Introduction

The development of the chemical, petrochemical and food industries requires the creation of new highly efficient, reliable and safe devices.

In this regard, the development of advanced designs of machines and devices of the chemical industry, intensification of production processes and reduction of the cost of equipment, which is facilitated by its correct calculation and design, are of paramount importance.

In course work, engineering and technical problems related to the design and ensuring the strength and reliability of technological equipment are solved.

The topic of the course work is devoted to the design and calculation of the strength of the apparatus with a stirring device.

Gotovy_chertezh.frw