Development of assembly-welding process of horn antenna support
- Added: 30.08.2021
- Size: 532 KB
- Downloads: 1
Description
The object of this graduation qualification work is the support of the horn antenna. The purpose of this work is to increase the efficiency of the assembly-welding process and the quality of welded joints of the support article by replacing manual arc welding with coated electrodes with manual argon-arc welding with a non-consumable electrode. Welding processes were implemented by manual argon arc welding with a non-consumable electrode; technological processes of assembly-welding of horn antenna support were implemented with the help of developed mechanical clamp. Economic calculation of the applied welding technologies was carried out, as well as harmful factors in production and methods of their elimination were identified.
Project's Content
КФБН 171266.00.00ГЧ.cdw
|
КФБН 171266.00.02.frw
|
|
18 КФБН 171266.00.00СБ.frw
|
|
Плакат контроль сварных соединений.cdw
|
|
КФБН 171266.00.03.frw
|
|
КФБН 171266.00.01.frw
|
|
16 Плакат Тех процесс сборки-сварки.cdw
|
|
Плакат сборочно-сварочного участка.cdw
|
|
16 сварные соединения, контроль качества.cdw
|
|
КФБН 171266.00.04.frw
|
|
МОЯ ОПЕРАЦИОННАЯ КАРТА.frw
|
|
Сварные швы,режимы сварки.cdw
|
КФБН 171266.00.00.spw
|
Additional information
КФБН 171266.00.00ГЧ.cdw
Плакат контроль сварных соединений.cdw
КФБН 171266.00.03.frw
16 Плакат Тех процесс сборки-сварки.cdw
Плакат сборочно-сварочного участка.cdw
16 сварные соединения, контроль качества.cdw
МОЯ ОПЕРАЦИОННАЯ КАРТА.frw
Сварные швы,режимы сварки.cdw
КФБН 171266.00.00.spw
