Design the drive for the belt conveyor of the baggage compartment workshop of the airport

The course project consists of  an explanatory note, which includes:

Introduction. 

1 Kinematic and energy calculations of the drive. 

2 Calculation of Flexible Drive Links

3 Geometrical and Strength Analysis of Gears

3.1 Calculation of Bevel Gear with Circular Tooth of Gearbox High-Speed Stage

3.2 Calculation of the cylindrical helical gear of the low-speed gearbox stage

4 Sketch layout of the drive station gearbox

5 Geometrical and Strength Calculation of Gearbox Shafts

5.1 Design design of shafts

5.2 Drive Shaft Verification Calculation

5.3 Countershaft Verification Calculation

5.4 Slave shaft test calculation

6 Selection and Calculation of Gearbox Bearings

6.1 Design of high-speed shaft bearings

6.2 Design of countershaft bearings

6.3 Design of Low-Speed Shaft Bearings

7 Selection and calculation of couplings.

8 Selection and Calculation of Keyway or Spline Connections of Gearbox Shafts with Gears

8.1 Calculation methodology.

8.2 Key under the high-speed drive wheel

8.3 Key under the low-speed gear wheel

9 Selection and Calculation of Threaded Connections of the Gearbox Housing and Bearing Units

10 Design of Gearbox Housing Elements

11 Lubricant selection

12 Selection of Lubrication Devices

13 Selection of Shaft and Bearing Seals

Conclusion

Bibliography

 5 drawings: A1 format gearbox layout diagram (two drawings)

A1 format gearbox assembly drawing

A3 Format Wheel

A3 shaft