Conical gearbox

Specification 1. Stain of teeth in engagement of conical gear along length and height of tooth must be not less than 50% .2. The total axial clearance in the bearings of the high-speed gear shaft shall be within 0.04... 0.07 mm.3. The total axial clearance in the low-speed gear shaft bearings shall be within 0.04... 0.07 mm.4. Run-around the reduction gear box under rated load at speed of the reduction gear box speed 504 min during 1 part 5. Cover the mating surfaces of the housing during final assembly of the reduction gear box with a thin layer of UT-34 sealing compound, GOST 24285-80 .6. * Dimensions for reference. 7. Pour oil into the reducer: "Industrial I-G-A-32" GOST 20799-88 5 liters.8. Lubricant in bearings on low-speed shaft: synthetic solidol GOST 4366-76.9. Coating of unprocessed external surfaces of reduction gear box housing shall be double-layer: 10. Coating of the internal untreated surfaces of the reduction gear box housing, perfume and oil dump plug shall be two-layer: