Calculation of the tracking electric drive

In the course project, according to the assignment, it is necessary to calculate the tracking electric drive.

During the project execution, the following was carried out:

1. Selection of the actuator motor.

2. Calculation of the transfer function of the actuator motor.

3. Construction of the frequency response of the motor.

4. Calculation of the tracking drive.

5. Construction of the frequency response and the amplitude-frequency response of the drive.

6. Construction of the frequency response of the corrective device.

7. Calculation of the corrective device.

8. Selection and calculation of the mismatch sensor.

9. Calculation of the amplifier.

10. Determination of the characteristics of the tracking drive.

The project includes:

- Explanatory note;

- Specification;

- Electrical schematic diagram (A2).