Butt roll

Rolling is a type of mechanical treatment, the purpose of which is to strengthen the surface layer of the part, increase its wear resistance and achieve 8-10 square meters of surface accuracy. Parts made of various plastic materials and steels with hardness not more than HRC 35-40 are treated with plastic deformation by roller or ball rolls and rolls. The piercing roller is used to roll chamber patches and cord patches during vulcanization operations. A patch is made from the center to the edges. Due to the ergonomic shape of the handle, the rolling process is fast and easy. General parameters: Handle material - the material from which the handle of the hand roller is made - most often it is wood or plastic. Type - Auxiliary tool for installation of insulation materials on open surfaces. The width of the working surface is the actual width of the roll for a 5 mm roll. The material of the working surface is the material of the roll for a roll. It is mainly a metal, since a strong and reliable connection to the material is required to protect against external sounds. Such rollers serve reliably and for a long time. It is necessary to roll the repair patch from center to edges without air bubbles and irregularities. Accessory, compass, vulcanization