Belt conveyor 115 t/h
- Added: 24.12.2022
- Size: 3 MB
- Downloads: 5
Description
Drawing of belt conveyor 115 t/h chalk
Initial data for the design:
Geometric scheme – horizontally inclined;
Capacity – 115 t/h;
Transported material – chalk;
Length of inclined section - L_1=15 m,
Length of horizontal section - L_2=20 m,
Angle of inclination to the horizon of the inclined section - 12;
Working conditions – average;
Tensioning device – spring-screw.
In this course project, a constructive scheme of a horizontal-inclined belt conveyor for transporting chalk by 35 meters, providing a capacity of at least 115 tons / h, has been developed.
The horizontally inclined belt conveyor is equipped with a drive with an electric motor 4A160M8U3 with a capacity of 11 kW and a rotational speed of 750 revolutions per minute, as well as a gearbox of the type 2Ts2-125N.
The traction element of the calculated conveyor is a rubber-fabric belt of TK-100 type. To tension the belt, a spring-screw design of the tensioning device was used.
Technical characteristics of the conveyor:
Capacity, t/h 115
Length of cargo transportation, m 35
Transported chalk material
Tractive organ:
Tape TK-100
Speed, m/s 0,98
Electric motor:
Type 4A160M8U3
Power, kW 11
Rotation speed, rpm 750
Reducer:
Type 2Ts2-125N
Gear ratio 16
Project's Content
Общий вид.cdw
|
Расчеты(Жирков).docx
|
Спецификация к общему виду.spw
|
Additional information
Общий вид.cdw
Спецификация к общему виду.spw
Similar materials
- 24.01.2023