accessory for removal of units

The fixture is mounted in the pit on the ball bearings 17 and can be calmly moved along the entire length of the pit and the track width can be adjusted by means of the support arm 2 and the axle 6. The removable unit is installed on the semi-bed 9, which in turn is installed on the bed bar 7. it is possible to adjust the seat for any unit for this purpose, special slots are made in the upper frame 2 for the bed plate and the length is adjusted, and slots are made in them to adjust the width. The half-bed together with the bed bar can be dismantled and the device can be used as a jack with a carrying capacity of 1.5 tons. For use as a jack, the support heels 10 are mounted on the arms and are also subject to width adjustment when not required to be dismantled. The power element in this structure is the hydraulic jack powered by the remote plunger in the drawing is not specified since this standard product is purchased separately.