RU
Waiting For Moderation: 6

Menu

Drawings Drawings content Pictures

Total: 72421

Drawings
Category
Mechanical engineering
Tanks (the 9 page from 74)

Tanks

Calculation and design of a continuous evaporator for evaporation of aqueous solution CaCl2, capacity 13000 kg/h

22.10.2023

Calculation and design of a continuous evaporator for evaporation of aqueous solution CaCl2, capacity 13000 kg/h

Hydrotreating reactor

08.10.2023

Hydrotreating reactor

Biological pesticide pilot equipment

08.10.2023

Biological pesticide pilot equipment

Distillation Tower for Methanol-Ethanol Separation

07.10.2023

Distillation Tower for Methanol-Ethanol Separation

CIGAR-Flash heat recovery system

06.10.2023

CIGAR-Flash heat recovery system

Drum dryer for drying chalk

03.10.2023

Drum dryer for drying chalk

Cyclone - General view drawing with specification

23.09.2023

Cyclone - General view drawing with specification

The device of the bottom of the tank and the reinforced concrete tank

16.09.2023

The device of the bottom of the tank and the reinforced concrete tank

Typical tank RVSP - 5000

15.09.2023

Typical tank RVSP - 5000

Single-pass heat exchanger with a working pressure of 0.4 MPa

14.09.2023

Single-pass heat exchanger with a working pressure of 0.4 MPa

Functional diagram of automation of distillation column with plates

31.08.2023

Functional diagram of automation of distillation column with plates

Shell-and-tube heat exchanger for cooling 500m3/h (under normal conditions) of natural gas from T1H. = 44°C to t1k =12°C.

04.08.2023

Shell-and-tube heat exchanger for cooling 500m3/h (under normal conditions) of natural gas from T1H. = 44°C to t1k =12°C.

Spray Drying

28.07.2023

tanque

13.07.2023

Static Wastewater & Sodium Hydroxide Mixer

10.07.2023

Static Wastewater & Sodium Hydroxide Mixer

Water dispenser

30.06.2023

Water dispenser

<<
<
7
8
9
10
11
>
>>